Panasonic EY7552XT 1/2in Heavy-Duty Impact Wrench & Systainer Case 18V Bare

The Panasonic EY7552XT Impact Wrench comes as a Bare Unit, No Battery or Charger.

It is supplied in a handy Systainer Case. The Systainer Case System is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.

The Panasonic EY7552 1/2in Heavy-Duty Impact Wrench has an improved twin hammer block design which allows for a smaller size and lower weight, but also provides reduced vibration and noise levels, making it a comfortable, hard-working tool. The EY7552 offers approximately 230% higher power with almost 50% less vibration and most compact in the high power class when compared with EY75A2 impact wrench. This also helps to protect against damage to the unit itself where repeated contact with the floor or work station causes wear.

To reduce the risk of battery power running out, users can check the power level status using the battery capacity level indicator when preparing to take the unit to remote or high-level areas with no access to a power source. Fitted with a 'C spring' type retainer ring, meaning sockets can be fitted easily and can be changed quickly. It's important not to use sockets without a pin facility option. For the strongest, safest socket attachment, use a pin and rubber ring retainer. The 'C spring' retainer is for temporary socket attachment only.

Specifications:

No Load Speed: 0-1,550/min.

Impact Rate: 0-2,400/bpm.

Max. Torque: 470Nm.

Bolt Capacity: Standard M6-M24, High Tensile M6-M18.

Charge Time: Usable 65 min., Full 80 min.

Weight: 2.6kg.

Panasonic

A02

B2078