See more Frost & water proofers
Raincheck Universal Water Seal (5 Litre) High-Strength, Breathable, Colourless, Waterseal for Brick, Wood and Stone
Sold & shipped by Safeguard Europe
Product details
Product information
Raincheck Universal Water Seal is a multi-surface colourless weatherproofer for use on masonry, timber and stone. It can be used on old and new buildings to protect brick and stone facades from penetrating damp or to protect paving and timber from moisture ingress. The solvent-free formulation has been shown to outperform other water seal materials, providing breathable protection from moisture for up to 10 years with just a single two-coat treatment.
- Raincheck® Universal Water Seal should be applied in temperatures between 5 – 30°C. Wear suitable protective clothing (including protective gloves). Do not apply if rain is forecast for the next 24 hours. Raincheck® Universal Water Seal should not be applied to wet surfaces or where it has rained in the last 24 hours. Raincheck® Universal Water Seal should only be applied to dry, porous surfaces. All coatings should be completely removed including paints and varnishes. All surfaces to be treated must be clean and dry before treatment can begin. When biological growth such as algae or lichen needs to be removed, apply SoluGuard® Multi-Surface Biocide in accordance with instructions. Application to structures containing high levels of salt should be avoided. It is intended for use above damp-proof course level only. Window/door frames, glass surfaces and plants should be covered up before treatment, since removal of silicone resin splashes after drying can be very difficult. Splashes should be removed as soon as possible using soapy water. After use clean brushes or sprayer with soapy water.
- Guarantee - Statutory
- Store in a cool, well ventilated area. Keep container tightly closed. Protect from frost
Features and benefits
Raincheck Universal Water Seal is a multi-surface colourless weatherproofer for use on masonry, timber and stone. It can be used on old and new buildings to protect brick and stone facades from penetrating damp or to protect paving and timber from moisture ingress. The solvent-free formulation has been shown to outperform other water seal materials, providing breathable protection from moisture for up to 10 years with just a single two-coat treatment.
- High Strength Formulation - 5% Active Ingredient
- Long-Lasting up to 10 Years Protection
- BRICK, WOOD & STONE Waterproofing
- Even Penetration - No Wet Spots; Bridges hairline cracks
- Rapid Curing, Breathable, Colourless Water Seal
Legal Information
- May produce an allergic reaction.
Specifications
Drying time | 1-2 days |
---|---|
Number of pieces | 1 |
Base | Water-based |
Recoat time | 30 minutes |
Maximum application temperature | 35°C |
Location | Exterior |
Product weight | 5000g |
Minimum application temperature | 3°C |
Coverage per litre | 3.5m²/L |
Suitable for | Concrete & brick |
Product code | 5060132764442 |