See more Decking Paint & Treatments
Ronseal Clear Decking cleaner & reviver, 5L
Product details
Product information
You can apply this decking cleaner & reviver from Ronseal to , using a brush, to provide protection. It takes 24 hours to dry and will cover up to 5m² per litre on average.
- Prepares new wood, revives weathered wood & keeps your deck clean.
- Apply with a Brush
- Wood
- Clean decking prior to finishing the deck with an oil or stain.
Features and benefits
This decking cleaner and reviver is ideal for applying before putting on a decking stain or oil because it helps them to adhere to the deck, so it'll look great for longer. It also cleans and revives weathered or tired timber decking, removing moss, mould and algae whilst brightening the wood and restoring it to its natural appearance. Not only that, it can be used as a general cleaner, brightening and enhancing your deck throughout the season.
- Helps to make your coating last longer
- Fast acting, so no waiting around
- Can be used over stains and oils
- Control air pollutants by choosing products with lower solvent levels.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
| Brand | Ronseal |
|---|---|
| Colour | Clear |
| Litre capacity (ml) | 5000ml |
| Coverage | 5m² |
| Location | Exterior |
| VOC level | Minimal |
| Pack quantity | 1 |
| Product code | 5010214826926 |
Reviews
Almost does what it says on the tin.
Chewy66 - 1 month ago
This is actually a good product. My deck was in a fairly poor state. Jet washed it first to get rid of flaky bits of old stain. Then used this reviver, gave it a good scrub with hard bristled yard broom after, then rinsed off with hose (did seem to take a while to rinse off). The dirt that rinsed off (considering i had already jet washed it beforehand) was amazing. I had thought originally would need to do it twice, but its come up so good, I'm not going to do it a second time.
I think coverage estimate on container is a bit "generous." I would certainly recommend spreading it more liberally, but overall, a good product.
Doesn't do what it say on the tin
Indi12 - 1 month ago
Treated a patch of decking as per instructions, similar area untreated, power washed both areas equally. No difference in treated Vs untreated. Waste of money.
Great product
Pixie01 - 3 months ago
The decking was really dirty.
I put in a fairly liquid bottle and carefully squirted it on. Then used a stiff broom to sweep it in. Left for half hour In hot sun.
Then pressure washed off with a karcher yellow pressure washer.
The results were awesome ! .
It took at least 3 hours as I didn’t know what I was doing but learned trial and error.
This one needs fixing.
You have to get into the grooves on the decking and high power wash it off.
Im going to wait 48 hours before I apply Ronseal ultimate teak decking oil. If that don’t work then il get a stain.
I found it very difficult. But the cleaner is an excellent cleaner and I would recommend.
I’m an expert now.
Brings back to new
Rhodster - 4 months ago
Have large decking untreated for 5 years
Used this product, sprayer for even coverage, wire brush to scrub it in and jet wash to remove. So yes you do have to put a bit of effort in so I can understand why people mark it low. However, It is wood left outside in all seasons!! How often do you wash your car??
I’m on to putting decking oil on next to give it some more longevity
Some work required
Phil_XIV - 5 months ago
It does what it says in the tin. But it is not without effort.
First I spraied the surface, let it act for about 30 to 40 mins. Then a generous scrub to loosen the majority of the dirt. Then use a strong power jet to finish. And last apply wood stain.
Great results.