24 people bought this in 48 hours
Ronseal Diamond hard Natural Matt Doors, floors, furniture, skirting boards & windows Wax Wood wax, 0.75L
Product details
Product information
You can apply this wood wax from the Ronseal Interior diamond hard range to , using a brush, to provide protection. It takes 20 minutes to dry and will cover up to 16 m² per litre on average.
- Surface Preparation - Use white spirit and a cloth to get rid of any old wax, grease or oil. Sand the surface with 120 grit sandpaper and wipe away the dust once it’s settled. Leave it to dry before waxing.
- Instructions for Use - Our wax is liquid so you’ll need to give it a thorough stir before you use it to even out any lumps. Apply the first coat going in the direction of the grain. Wait one hour for it to dry. For the best results, apply three coats. The final coat will be dry in only 20 minutes. There’s no need to buff between coats and there’s no mess.
Features and benefits
- Dries in just 20 minutes
- You don't need to buff between coats
- Easy to apply with a brush - No cloth, no mess
- Control air pollutants by choosing products with lower solvent levels
- Dries in just 20 minutes
- This interior wax protects like a varnish against knocks, scuffs and scratches, whilst leaving a natural look and feel to the wood. Simply brush it on, no buffing required.
Legal information
- Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2Hisothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Ronseal |
|---|---|
| Finish | Matt |
| Coverage | 16m² |
| Recoat time | 1 hour |
| Durability | Heavy duty |
| VOC level | Medium |
| Volume | 750ml |
| Room use | Any room |
| Application method | Brush |
| Suitable surface | Multi-surface |
| Suitable for | All types of wood |
| Container type | Tin |
| Product code | 5010214868797 |
Safety Information
Manufacturer / EU responsible person
Reviews
3.5 / 5(14 reviews)DJHitch - 4 / 5 - 05/03/2025
Works well !
Works well but I think I would prefer something that is more like a wax! It seems to be more like a paint not a wax
Steve99991232165 - 5 / 5 - 27/02/2025
Good product
Goes on very easily with a brush and dries quickly allowing multiple layers to be applied in one day.
mcb65 - 5 / 5 - 01/03/2023
Excellent wax
Used on an oak door. I was looking for Ronseal Brushing Wax which I had used before, but now seems to be discontinued. I was very pleased with the finish. Natural is a warm finish on oak and covers consistently. I used 2 coats. Nice and easy to apply as well.
Dr jotty - 5 / 5 - 13/10/2022
Easy to brush on
Easy to apply, several coats needed. After 3 coat on oak veneered doors a light sand to flatten the grain and a final coat and they feel and look great.
Shore - 5 / 5 - 01/08/2021
Great product and easy to use.
We are restoring our cottage and have used this product many times now. It is so easy to use and gives a great finish to sanded back wooden beams, table tops and a restored cabinet. Make sure you stir the product in the tin thoroughly and apply sparingly and wait a good hour before applying a second coat. Great finish.
Lucy2411 - 3 / 5 - 14/11/2020
Should be called ‘clear’
This should be branded as ‘clear’ rather than ‘natural’ as it has no colour pigment at all. It does have a nice matte finish and is really easy to apply so a good product if you’re just wanting to seal in the existing colour of your wood
Banksy78banksy - 2 / 5 - 02/05/2020
Depends on surface
I think it probably depends what finish was previously on the surface, but it doesn't go on like a wax, more like a varnish. I thought I'd stripped back a table far enough, but the finish is ok to touch for a second. Any more than that and it gets tacky, so placemats are actually peeling the finish off, which I didn't expect to happen with a wax. I've done 4 coats now and tried sanding and not sanding between coats - the result is the same
Pammy67 - 1 / 5 - 15/03/2020
Dreadful. Ruined a silky smooth finish.
Dreadful stuff. Totally destroyed the silky smooth finish on my old chest of drawers. The finish is now very rough. The “wax” was a solid lump at the bottom. Took a load of shaking to break it up into the very watery liquid. Think the product was probably faulty.
Mookygirl - 1 / 5 - 12/11/2017
Waste of money
Nice colour, looks nice and easy to apply, but dries to a horrible rough texture to previously perfectly sanded wood. Am now having to re-sand and buy a different wax.
WGS3X - 5 / 5 - 09/10/2017
Brush on wax
Easy to put on giving a good even finish and quick drying.