See more Multi surface paint
Ronseal Pure brilliant white Satin Metal & wood paint, 0.75L
Product details
Product information
This Pure brilliant white satin wood & metal paint has been specially designed to give a durable and long-lasting finish on a range of surfaces. Simply apply with a brush and leave for 4 hours to dry - a great way to give the surfaces additional protection. Covers up to 7m² per litre on average.
- Stir thoroughly before use. Using a synthetic brush, apply 2 coats, leaving 4 hours between each.
- Suitable for Metal & wood
- Prime surface with Ronseal Knot Block Primer & Undercoat.
Features and benefits
At B&Q we want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up so you are sure that this is the right colour for you.
- Use with Ronseal Knot Block Primer & Undercoat for Stays White Forever Guarantee
- Stays White
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
| Brand | Ronseal |
|---|---|
| Application method | Brush |
| Base | Water-based |
| Colour | Pure brilliant white |
| Coverage | 7m² |
| Drying time | 4 h |
| Finish | Satin |
| Location | Interior & exterior |
| Recoat time | 4 hours |
| Minimum touch dry time | 0.5h |
| VOC level | Low |
| Volume | 750ml |
| Washable | Washable |
| Product code | 5010214875245 |
Reviews
Does not live up to the name "gloss"!!
PJM_001 - 1 year ago
I correctly sanded the skirting boards, windows, and doors before applying undercoat - all went well until this "gloss" was used - it is very thin, only seems to want to stick to the brush and results in a very rough, scratchy finish. After two coats (benefit of doubt) I had to sand everything down and use a different gloss which came out brilliant first time.
4 coats to cover
DIY Hen - 3 years ago
I used this on top of 2 coats of ronseal primer undercoat and even after 4 coats it is far from perfect. It is very thin and in my opinion hard to apply.