See more Spray Paint
Rust-Oleum Stone Aged Iron Spray paint 400 ml
Ideal for multi surface, this Aged Iron spray paint from the Stone range by Rust-Oleum has been specially designed to give a stunning finish to around your home. Simply apply and leave for 24 hours to dry - a great way to revamp your home. Covers 1.2m² per litre on average.
- Surface preparation: Ensure surfaces to be painted are free from loose paint, rust, wax, oil & grease.Previously painted surfaces should be abraded to provide a key. Bare wood & metal should be primed with Rust-Oleum Surface Primer. Bare plastic should be primed with Rust-Oleum Plastic Primer. Cover surrounding areas to protect from spray mist
Features and Benefits
- Rust-Oleum Textured provides a rich, multi-coloured textured finish. They eye-catching decorative effect is created by simultaneously dispensing multiple colours from a single can
- Can be used on other surfaces over a suitable Rust-Oleum primer
- Excellent coverage, hiding & colour retention
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Location||Interior & exterior|
|Colour description||Aged Iron|
|Coverage||1.2m² per litre|
|Drying time||24 hours|
|Recoat time||30 minutes|
|Touch dry time||20 minutes|
|Litre capacity (ml)||400ml|
markinlondon - 6 months ago
So I wanted to refresh 3 garden furniture resin cubes...... they look great now, better than brand new. Aged iron - dark gunmetal grey.
I did a quick sand down on one as it had a shiner finish, then a grey primer, then 3 tins of spray!!
Downside, 3 cans per cube is needed and they only total 1.2m square each so budget for twice as much paint as you need!
I’m doing my third one next weekend!!!
And then a parasol base in a buff color.
High quality, unique finish that will make you proud. But buy twice as much as the can says.
It’s an excellent product - even my partner complemented me on how good they look!!!
Making a miniature
Anonymous - 1 year ago
Bought this to make a miniature church for our harvest festival and gave the right texture.
Would be great if it came out the tin. :(
FreeRunner - 1 year ago
Having now tried several cans with mixed results - I thought it only right to leave a review. I'd suggest that the instructions need looking into as they are wrong or lacking.
When working the nozzle creates a very thin jet - which when sprayed at the recommended 30cm - I found to be way to close as the product runs badly however quickly you move the tin.
Spraying at 60-80cm produced a much better spray but the coverage is then far less described and then becomes very expensive - ( for instance - I've just sprayed a mannequin headless torso and it needs approx 3 tins to do a satisfactory job = £27 )
The other thing they get wrong - is it says to shake tin for 1 minute, You'll find sometimes by doing that the paint then does NOT come out at all.
I have just wasted a trip to B&Q due to having a tin where the paint does not come out - as they were shut, I had to go back this morning - the service lady then pressed the nozzle only to find it spraying as it should.... obviously with little to no pressure in the tin from not shaking the recommended time.
I then came back home with the same tin as she would not replace it and - Yes - you've guessed it - shook tin for the 1 minute and nothing.
So - do I now waste yet more time and money on fuel or just give up as a bad job?
The final finish can be nice - but do expect your project to cost way more than you count on.