Rustins Brick & Tile Paint - 500ml

• Suitable for use on Brick, masonry & tile surfaces
• Surface Preparation - The bricks should be free from dust and contaminants. Brush the bricks with a wire brush to remove any existing finish, which may be flaking and to remove any loose particles and mortar. Fill cracks and repair damaged pointing. If the brickwork shows signs of efflorescence (white crystals on the surface), it must be removed by brushing or scraping. A coat of Alkali-resisting Primer must then be applied and allowed to dry before applying Rustins Quick Dry Brick & Tile Paint. No primer is required if fresh mortar has been applied to the pointing and if painting new brickwork. If applying to existing painted brick test for compatibility as if not compatible it may flake off or dry to a glossy finish.
• Instructions for Use - Use a large brush and apply evenly. Apply paint liberally, making sure the surface is covered completely.
• Guarantee - Statutory

Features and benefits

A high quality acrylic matt red paint.

For interior and exterior brickwork and tiles.

Quick drying and pigmented with micronised red oxide to give good opacity and exterior durability.

Sizes Available : 250ml/500ml/1tr/2.5ltr/5ltr

• Water Based, Matt Red Finish
• Interior & Exterior
• Bonds Exceptionally Well
• Durable & Weather Resistant
• For bricks, tiles, walls, cement and stone
• For bricks, tiles, walls, cement and stone
• Width (mm): 89