See more Planers
Ryobi 600W 240V 82mm Planer EPN6082CHGA
This corded planer is ideal for precise woodworking and smoothing.
- 16000 rpm no load speed
- Up to 1.5mm planing depth, up to 8mm rebate depth and 82mm planing width
- 1 chamfer grooves for cutting bevels and chamfers
- Dust extraction facility and Left / right chip ejection to keep your workspace clean
- Supplied with 2 x TCT planer blade sets (contains 2 blades each), dust bag, side fence, wrench
Features and Benefits
- Powerful 600W motor & a kick stand to prevent damage to the work piece when tool is not in use
- 0.5mm chamfering groove in die-cast front shoe for shaving off edges
- Positive dial adjustment from 0-1.5mm planing depth
- Double-sided fence for precision rebating
- DustTech™ Integrated dust technology system for maximum pick-up efficiency
|No load speed||16000 rpm|
|Planing depth||1.5 mm|
|Number of chamfer grooves||1|
|Parallel fence||Parallel & rebate guide|
|Dust extraction||Dust extraction facility|
|Chip ejection direction||Left / right chip ejection|
|Cooling type||Fan cooled motor|
|Cable length (m)||2.5m|
|Safety feature||Livetool Indicator™|
|Switch type||Trigger switch|
Blew up after 30 doors
Tom 51 - 7 months ago
I was very pleased with this until on my third house renovation there was a flash and a bang and it was dead and outside guarantee period. Only used for planing doors to fit on a fine cut. Would have given 5 stars if it had not failed after so little use.
Good value, with limitations.
SuttonDave - 9 months ago
Simple to use and leaves a very good finish. The dust bag is a nice feature but much too small. Planing the long edge of a door at 1.5m and the bag fills up part way along, then spews dust everywhere.
Apart from that, a decent tool for occasional DIY.
Great but for the dust bag.
Proboscis Rouge - 10 months ago
Bought this to replace an old item. So glad I did, great piece of kit.
Well made, easy to adjust and use. Good results.
Didn't rate the dust bag first time I used it was for a door. Son in law held the door whilst I made a cut from one end to the other. Much to our amusement he was covered from head to foot after one pass.
Even when properly set the output orifice blocked very quickly resulting in all the waste being emitted.
Big Ken - 1 year ago
Previously have had Bosch planes and subsequently had accuracy problems on wide boards. So far this plane performs well having an accurate method of controlling depth of cut and planes accurately across wide boards to ensure flat surface
argybargy - 1 year ago
Excellent value for money. Easy to use and works very well. No complaints at all. One of the few that comes with a dust bag.
Customers who bought this also browsed
Bosch 240V 190W Corded All rounder multi tool
This corded all rounder multi tool is ideal for sanding wood or old paint, shortening door frames when laying laminate flooring, grout removal and scraping. No load speed: 15000-21000 rpm Uses allen key (included) for blade changes Accessories included: Comes with 1 x segment saw blade, 1 x plunge cut ...
Bosch 240V 220W Corded Multi tool PMF 220
This corded multi tool is ideal for a variety of tasks such as sanding and cutting. No load speed: 15000-20000 opm Speed control - Variable Allen key blade change Accessories included: Segment saw blade, wood plunge cut blade, delta sanding plate, sanding, set with sanding sheets (6 pc), depth stop ...
JCB 2300W 240V Angle Grinder PGA230JC
No load speed: 6500 rpm Takes 230mm diameter x 22.2mm bore cutting discs Spindle fitting: M14 Supplied with a 3m cable, 3 position side handle and 1x metal grinding disc, 1x anti-vibration handle, 1x spanner, 1x quick release grinding guard
Makita 240V 320W Corded Multi tool TM3000CX13
This corded multi tool is ideal for sanding when fitted with delta sanding head, for cutting jobs where space is an issue and for plunge cutting, scraping and grout removal. No load speed: 6000-20000 rpm Speed control - Variable speed control Uses hex key (included) for blade changes Accessories included: ...