SECURITY 50mm DOUBLE Long Throw Bolt Gate Lock Garage Shed 5 Keys AND HANDLE

• DOUBLE GATE LOCKING: Premium quality double Locking Bolt to Suit 50mm (2.75 inches) Doors and Gates (Size is equal to gate and door depth)
• SIMPLE INSTALLATION: Each garden lock comes individually boxed with a full set of stainless steel fixings and heavy duty 18 x 18 mm marine grade 316 stainless steel locking bar, a solid brass escutcheon plate and a fitting template for left or right hand installation.
• SECURITY: Added security gate lock - made with 6 pin lock barrels. Ideal to be used as an extra shed or patio door security.
• EXTRA KEYS: Long throw lock are supplied with 5 keys in the box.
• DESIGN: for single or double gates. Key lockable from both sides of gate with 5 keys, the unique bolt design with hardened steel core and Brass escutcheon plate has an extremely high corrosion resistance. Grade 316 stainless steel shoot bolt, and elongated anti-rattle keep prevent rattling during windy weather.
• HANDLE INCLUDED

Fitting Instructions:

Step One: The lock should be fitted to the door or gate once it has been hung and all necessary adjustments have been made. The lock body should be mounted inside (secure side) of the gate, with just the barrel showing outside - to prevent any tampering with the lock

Step Two: Work out the position the lock should be mounted and mark affix the template. The lock body should be no less 5mm from the edges of the gate and obviously the throw of the lock needs to reach across to secure the gate. Also Check on the other side of the gate to ensure the hole is in a suitable position.

Step Three: Using the drill bit supplied make sure the hole is drilled level and straight for the best performance of the lock. Drill through until the central point of the drill bit protrudes out on the back and then finish the hole off from the back side to avoid splintering the timber.