Shock Absorber Suspension Strut Nuts Remover and Installer 18pc Kit 1/2" Drive

Professional shock absorber set for commercial or occasional use

Suitable for servicing suspension spring struts in most vehicle shock absorbers

This set helps to retain the piston rod and access the securing nut when removing the strut

Designed for repairing and replacing shock absorbers including Macpherson strut type assemblies

Most suspension strut top fixings require the top of the strut to be held while the fixing nut is removed

Go-through design of the socket and ratchet allows the extension to pass through the middle

Can be used in conjunction with a 1/2" square drive ratchet or T bar

Manufactured from C R-v steel for maximum strength and durability

Suitability for virtually all types / models of vehicles

SET INCLUDES THE FOLLOWING

• 1pc sliding T bar
• 1pc Go-Thru ratchet – 21mm
• 7pc Go Thru Sockets 16mm, 17mm, 18mm, 19mm, 21mm, 22mm and 24mm with 1/2" drive and 21mm Go-Thru drive
• 3pc 120mm hex bits – 6mm, 7mm and 8mm (1/2” drive)
• 3pc 120mm Oval sockets – 5 x 8mm, 6 x 8mm, 7.1 x 9.6mm – all 1/2" drive
• 1pc 120mm T50 star bit for Opel Astra H – ½” drive
• 3pc 120mm sockets – ½” drive – 7mm for Mercedes Benz Vaneo, 8mm for BMW, 9mm for Opel Corsa B, Astra F, G, Vectra B

Comes in a blow molded case for easy storage and transportation