See more Glues & adhesives
Buff Grab adhesive 310ml
Sold & shipped by B&Q
- All surfaces must be clean, dry and free from dust, grease and other loose material. Best results are achieved by applying beads of adhesive onto one surface only. Apply a 6mm diameter “zigzag” bead along the length of the item to be bonded. On large panels apply bead around the edge and across the panel at approximately 400mm intervals. Then using a twisting action, press the other surface into position to maximize surface contact and grab. Press surfaces together firmly for 30 seconds. Some support may be necessary for up to 24 hours. Cold, damp conditions or thick layers of adhesive will greatly extend drying times
Features and benefits
This solvent free grab adhesive has a high strength and is instant.
- High strength instant grab
- Interior use
- Multi purpose
- Keep out of reach of children
- Store in dry conditions between 5°C & 25°C
- Best results are achieved by applying beads of adhesive onto one surface only. Apply a 6mm diameter “zigzag” bead along the length of the item to be bonded. Press surfaces together firmly for 30 seconds.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||1 day|