SPARES2GO Gutter Side Rafter Bracket Universal Galvanised Steel Fascia Support Fixings (Pack of 10, 300mm)

Features and benefits

Premium quality pack of 10 universal side fix gutter rafter brackets. These brackets are commonly used on properties with overhanging tiles and exposed joists and can be used with round, square and deep flow systems. The fall of the guttering can be adjusted via the bracket making installation easier. Made with galvanised steel - ensuring rust / weather / corrosion resistance and long life. Includes screws, nuts and washers for easy installation.

• Universal Galvanised Steel Side Fix Gutter Rafter Brackets (Pack of 10)
• Kit Contains: 10 x Side Fix Rafter Brackets -- 10 x Screws --10 x Nuts and Washers
• Arm Length: 300mm -- Front Height: 118mm -- Front Opening: 65mm -- Mounting Hole Distance: 90mm
• Material: Galvanised Steel
• Standard: BS EN 12200 / BS EN 607
• Weather Resistant -- Rust Resistant -- Corrosion Resistant
• Heavy Duty
• Installation: These side rafter brackets are generally used on properties where there is no fascia board at the eaves (often referred to as open eaves). -- The rafter brackets are screwed onto the side of the foot of the rafter at the eaves. A standard fascia bracket is then attached to the vertical section of the rafter arm using the small nut and bolt supplied. -- The fascia bracket can then be adjusted up or down to ensure that the correct fall is achieved on the gutter.