Stonecare4U - Brick Sealer (10L) - Highly Protective Breathable Water & Damp Proof Sealer for Brickwork, Masonry & Concrete

• Guarantee - 6 months

Features and benefits

Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e gloves, suitable protective eye-wear, FFP3 class mask & clothing. Do not apply at temperatures below 8°C.

Certainly, it is important to perform a small test application in an inconspicuous area prior to use. This will indicate the suitability and effectiveness of the product for your surface. If unsuitable for your requirements, DO NOT PROCEED but contact us to return the product.

Before application, the surface must be completely clean and dry. Application methods include a low-pressure sprayer, roller, natural fibre brush or sponge.

Apply Essential Brick Sealer, to saturation, two coats “wet on wet” are needed to ensure complete coverage. DO NOT DILUTE. Surface dry after 45-60 minutes. If rain is forecast or starts, then stop treatment immediately and cover the freshly impregnated areas, the surface is required to stay completely dry for the first 6 hours after application.

• Stonecare4U Brick Sealer from Stonecare4u was formulated with technical synthetic resins that help to seal and protect masonry stone surfaces.
• Ready to apply straight from the bottle, the quick and easy solution to sealing your brickwork.
• It significantly reduces the potential for organic soiling and green growth and algae growth, whilst allowing the surface material the ability to “breathe” and transfer moisture vapour.
• Apply undiluted, up to 15m² per litre per coat. Dependant on the porosity of the surface. Check the surface after application to ensure the full effectiveness of the repellent.
• Please Note: Essential Brick Sealer may delicately enhance the natural colour of the brick surface – always try the product in an inconspicuous area prior to use. Surfaces that are not to be sealed should be protected with masking material.