See more Paint
Stonecare4U - Sandstone Sealer Colour Boost (15L) - High Performance, Colour Enhancing Sandstone Tile, Floor & Patio Sealer
Sold & shipped by Stonecare4U Ltd
Available online only and not stocked in B&Q stores
Product details
Product information
Stonecare4U's Sandstone Sealer Colour Boost is a professional-grade sealer for natural sandstone. The product is an eco-friendly impregnating sealer, which enhances the natural hues of the stone with deeper, more vibrant colours. Most importantly, it penetrates into the surface of the stone to protect against staining and heavy soiling. Also, the colour boost formula delicately accentuates the stone’s natural hue and colours.
To sum up, you can clean sealed areas with a mild, ph neutral cleaner or a very low concentration of our outdoor cleaner range. Do not use harsh or abrasive cleaning agents, as this can have a negative effect on the treated surface. This product is not recommend for use on non-porous surfaces
- Guarantee - 6 months
Features and benefits
Before use, remove any loose debris from the work surface and ensure adequate safety wear, i.e. gloves, suitable protective eyewear, face mask & clothing.
Leave the surface for a minimum of 72 hours with clear and dry weather to ensure the surface is completely dry and ready to be sealed; likewise, make sure weather conditions are favourable before commencing!
Apply the first coat of Essential Sandstone Sealer Colour Boost with a low-pressure sprayer, roller, natural fibre brush or sponge. DO NOT DILUTE.
Completely remove any excess sealer from the surface after 20 to 30 minutes.
Apply a second application approximately 45 to 60 minutes later, repeating the process. Keep the stone surface completely dry through the curing process, which can take up to 72 hours. Any moisture or water left on the surface may result in the sealer drying inconsistently, possibly creating unsightly white patches.
Please Note: Essential Sandstone Sealer Colour Boost will alter the colour/appearance of the stone surface. Always try the product in an inconspicuous area prior to use. Surfaces that are not to be sealed should be protected with masking material.
- Stonecare4u's Sandstone Sealer is a high performance sealer for stone which was designed for external and natural sandstone surfaces, which is suitable for other porous natural stones including limestone and slate.
- Our special colour boost finish not only provides fantastic water repellency, but also works to enhance the natural hues of the stone, creating deeper and more vibrant colours which really bring your home to life.
- After application, the attractive colour boost finish can help to inhibit the growth and regrowth of moss algae and lichen spores that cause unsightly patches on your surface, as well as inhibiting efflorescence.
- Considered to be professional grade by many experts and users alike, our product was also formulated to have an eco-friendly composition to make it safe for children and pets once dry!
- Average 4 – 6 sq metres per litre on textured and riven surfaces. Up to 15 sq metres per litre on smooth, honed or polished surfaces. Coverage will vary depending on surface porosity.
- *Please note this product is not suitable for Kandla Grey (mid & light grey) sandstone.
Specifications
| Base | Water-based |
|---|---|
| Location | Interior & exterior |
| Paint type | Sealer |
| VOC level | No VOC level recorded |
| Volume | 15000ml |
| Product code | 5061002781019 |
