Stonecare4U - Sealer's Gold Matt (Dry) Finish (1L) - Internal Floor & Tile Sealer. Long Lasting, & Stain Resistant

• Guarantee - 6 months
• Suitable for Interior use

Features and benefits

Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e gloves, suitable protective eye-wear, face mask & clothing.

Importantly, we always recommend performing a small test application in an inconspicuous area prior to use. This will indicate the suitability and effectiveness of Sealer’s Gold Matt (dry) Finish for your surface.

In addition, please make sure the surface be completely clean and dry before application.

After that, apply generously and evenly with a low-pressure sprayer, roller, natural fibre brush or sponge, removing any excess sealer with a dry cloth after 20 to 30 minutes.

Next, apply a second application after approximately 45 to 60 minutes, repeating the process. The sealer is highly effective, however, please note that it will take at least 24 hours before the product offers full protection. In the meantime, keep the surface free from water and oil spills, as stains may occur before the sealer has fully cured.

Please Note: Above all, areas not to be sealed must be protected with masking materials. It is strongly recommended when using coloured grouts that a stain test is completed before proceeding.

To sum up, clean sealed areas with a mild, ph neutral cleaner or a very low concentration of our indoor cleaner range. Do not use harsh or abrasive cleaning agents as this can have a negative effect on the treated surface.

• Stonecare4U Sealer's Gold Matt (dry) finish is a stone sealer formulated for indoor stone surfaces such as quartz, marble, slate, granite, travertine, limestone and more!
• A fantastic money-saving solution as this sealer does it all! Providing a - to a full replacement of the entire surface whilst also protecting the stone entirely!
• Possessing , protection is offered in all weather conditions, all year long. In addition to this, fantastic protection is offered to a many of stains and spillages both oil and water based.
• One of the many features of Sealer's Gold is the superb feature, and the ease of application using equipment such as a micro fibre mop, low-pressure sprayer, or paintbrush/soft cloth should be used to spread thinly across the surface.
• Apply undiluted, up to 30 m² per litre per coat. This is dependant on the porosity of the surface. Check the surface after application to ensure the full effectiveness of the Essential Sealer’s Gold Matt Finish.
• Please Note: Above all, areas not to be sealed must be protected with masking materials. It is strongly recommended when using coloured grouts that a stain test is completed before proceeding.