See more Spa chemicals & filters

Home

Right chevron

Outdoor & garden

Right chevron

Garden furniture

Right chevron

Hot tubs & saunas

Right chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
SUDS-ONLINE 5KG pH Plus (Increaser) for Swimming Pools, Spas and Hot Tubs

SUDS-ONLINE 5KG pH Plus (Increaser) for Swimming Pools, Spas and Hot Tubs

Sold & shipped by SUDS (SWINDON) LTD

Available online only and not stocked in B&Q stores

£
18.95
Loading
Checking availability...

Product details

Product information

    Bathing water that is low in pH can be corrosive to pool pumps, heat exchangers and damage the pool lining. pH plus is a powdered additive than can be used to raise the pH to a desirable level. However, too high a pH level and the effectiveness of all chlorine sanitisers starts to decrease. Always aim for a pH level of between 7.2 and 7.6. pH plus is suitable for use in swimming pools, spas or hot tubs.

    Swimming Pool Add 450 grams per 10,000 gallons of pool water. Dissolve in warm water in a plastic bucket and distribute evenly around the pool with the filter operating. Leave for 24 hours then re-test to ensure pH level is between 7.2 - 7.6.

    Spa and Hot Tub Add 11 grams per 1,000 litres of spa water. Dissolve in warm water in a plastic bucket and distribute evenly around the pool with the filter operating. Leave for 24 hours then re-test to ensure pH level is between 7.2 - 7.6.

      Features and benefits

      • Bathing water that is low in pH can be corrosive to pool pumps, heat exchangers and damage the pool lining. pH plus is a powdered additive than can be used to raise the pH to a desirable level. However, too high a pH level and the effectiveness of all chlorine sanitisers starts to decrease. Always aim for a pH level of between 7.2 and 7.6. pH plus is suitable for use in swimming pools, spas or hot tubs.
      • Swimming Pool Add 450 grams per 10,000 gallons of pool water. Dissolve in warm water in a plastic bucket and distribute evenly around the pool with the filter operating. Leave for 24 hours then re-test to ensure pH level is between 7.2 - 7.6.
      • Spa and Hot Tub Add 11 grams per 1,000 litres of spa water. Dissolve in warm water in a plastic bucket and distribute evenly around the pool with the filter operating. Leave for 24 hours then re-test to ensure pH level is between 7.2 - 7.6.

      Specifications

      Pack quantity1
      Product depth1mm
      Product length1mm
      Product weight5000g
      Product width1mm
      UKCA markedNot UKCA marked
      Product code5055501435740