Timbashield Wood Protector 5 litres (Forest Green)

• Most exterior wood types- rough and smooth
• Suitable for Wood
• Weather-resistant
• Instructions for Use - Surface Preparation: Shake / mix well before use and frequently during application (thorough mixing is needed to ensure a consistent colour throughout the treatment). Ensure surrounding areas, including plants and lawn, are protected before application. New Bare Timber: Ensure the surface is clean, dry and free from contamination. Previously Coated Timber: Remove any old loose or peeling coatings and sand back to a clean surface, ensuring any dust is removed. This will reduce the risk of problems such as patchiness or uneven drying. Wear a dust mask during sanding. Surfaces already coated with a microporous wood stain such as Timbashield Wood Protector or Timbashield Shed and Fence Protector should be allowed to naturally weather for a year and do not need the additional sanding step, they just need to be thoroughly cleaned before reapplication. Old Timber: Wood that has decayed or is damaged should be removed and replaced. Brush with a stiff brush to remove any dirt that has become ingrained. Mould, algae and fungi must be removed and treated with a suitable wood cleaner. Please note that the due to the differences in porosity of some wooden surfaces, rough sawn, absorbent wood will have a darker finish than harder smooth wood. This is due to how much product is absorbed. A test patch is always recommended. Storage and Shelf Life: The product should be stored in tightly closed original containers in a dry, well ventilated place away from sources of heat, ignition and direct sunlight. Recommended shelf life of this product is 12 months from date of manufacture. If you wish to use the product after this time, mix well and trial before use.
• Guarantee - 1 year
• Legal information: Contains Hydrocarbons, C9-C12, n-alkanes, cyclics, aromatics (2-25%), Hydrocarbons, C11-C14, n-alkanes, isoalkanes, cyclics, < 2% aromatics, 3-iodo-2-propynyl-butylcarbamate, Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, <2% aromatics, 2-OCTYL-2HISOTHIAZOL-3-ONE. Flammable liquid and vapour. May cause an allergic skin reaction. May cause drowsiness or dizziness. Causes damage to organs through prolonged or repeated exposure. May be fatal if swallowed and enters airways. Toxic to aquatic life with long lasting effects. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not breathe vapour/ spray. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wear protective gloves/ protective clothing/ eye protection/ face protection. IF SWALLOWED: Immediately call a POISON CENTER/ doctor. Call a POISON CENTRE/doctor if you feel unwell. Do NOT induce vomiting. Collect spillage. In case of fire: Use foam, carbon dioxide or dry powder to extinguish. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents/ container in accordance with national regulations

Features and benefits

A multipurpose and versatile range of premium solvent-based wood stains that have been specifically developed for use on exterior wood.

• Contains a unique blend of oils, resin and waxes that soaks deeply into the wood, building up a protective layer from within.
• Leaves a highly water resistant finish that protects the wood from the effects of weathering. The coating will not crack, flake, peel or blister due to the microporous and breathable nature of the stain.
• Available in a range of natural colours, Wood Protector not only enhances the beauty of the wood grain it provides highly water, UV and fungal resistant coating with the use of a dry film protection biocide.
• Clear wood finishes including Timbashield Wood Protector in clear does not protect against UV radiation and this can lead to some natural greying of the wood when used alone.
• Timbashield Wood Protector contains a blend of oils, waxes and resins that impregnate the wood, soaking into the pores and providing protection from within, rather than just at the surface.