Timco - Welded Masonry Joist Hangers - Galvanised (Size 100 x 225 - 1 Each)

The TIMCO Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. Manufactured from pre-galvanised steel to give a high level of corrosion resistance.

Conforms to Eurocode 6 and service class 2

Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timber"

Width mm: 100

Height mm: 215

Bearing mm: 75

Thickness mm: 2.4

Type: Welded

Material: Carbon Steel

Finish: Galvanised