See more Mortar
U-Can Mix in the bag Mortar, 17kg Bag
Ideal for fixing wobbly paving slabs, replacing crumbling mortar and building brick structures
- For repairs to exterior rendering and overcoating masonry or concrete surfaces
Features and benefits
Mix in the bag mortar is a convenient method for fixing wobbly paving slabs, laying bricks for steps and walls, and replacing crumbling mortar. It has a spout for adding water and a carrying handle, making transportation and mixing clean and easy.
- Leaves no mess and no clear up
- Mixes in less than 2 minutes
- Use straight from the bag
- Trade formulation
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||6 h|
|Location||Internal & external|
|Material||High-quality aggregates & portland cement|
|Range||Mix in the bag|
Easy to use - but not the promised 2 hr cure
gethinb - 24 days ago
Mixes easily and quickly for small jobs. Great consistency, but the promise of 2 hrs before start of setting is nonsense. My three lots are setting at rate of ordinary cement.
Not too bad
IanT68 - 1 month ago
The first thing I do when I try something new to me is hit YouTube for tutorials. Decent enough videos however when the guy tipped it from the bag I thought it looked a little on the thick side. Easy fix with a little more water. It states 2.5 litres but I used 3 litres and it still came out quite dry. 4 litres did the job.
Good for its use, mixing in the bag is a nightmare
Lander1 - 2 months ago
Bought to lay down about 3.5x2.5m of slabs in all. Mortar was good and is going strong the next day, so proof will be in time, but I’m impressed with it. Blue circle is what I was after but with the shortage it was tough to find that, so opted for U Can instead.
Word of warning, give it a little mix in the bag and then just dump the contents and add water when out of the bag. Mixing in the bag was atrociously poor and every bag (8) had to be finished off by hand when on the work surface
In all I’m impressed, would use again and recommend for easy jobs. Coverage is roughly 1 600x600 slab per bag, or just over. Some may say I used too much/too little but it works for me :)
An excellent product
Jockyfox - 4 months ago
Mixes easily in the bag - easy to apply - no mess - will use again
dfbkq4i - 1 year ago
Supposed to set in two hours. Twelve hours after use it's set all right. Not sure if "set" is the right word, though. I wanted this to set as a solid, as anyone might expect. However, it's set as crumbling dust... just like it was when it was bought, before water was added. What a complete farce