UAP Standard Pull Handle - Nanocoast - 600mm

Features:

- Sleek and attractive Satin Stainless Steel finish featuring Nanocoast technology to prevent corrosion and rusting

- Manufactured of 1.5mm 316 grade stainless steel

- Individual plate on each of the two fixing points of the handle

- 3 methods of fixing the handle: Back to Back, Hidden Fixings and Bolt Through

- Impressive 38mm diameter bar to ensure sturdier construction, easier gripping for those with limited hand movement and overall more robust look

- Allen Key with 2 Allen bolts included for each of the up stands

- Lifetime surface coating guarantee even if along coastal or industrial areas

Fixing Methods:

Hidden Fixings: There is an individual plate for each of the two fixing points which is fitted to timber or wood doors. The handle is then attached to these plates and secured by means of Allen bolts so the internal fixings are not visible on the door itself.

Bolt Through: The two Allen bolts give extra protection against vibrations that may take effect on a main road causing bolts to come undone. With the Allen bolts this will not happen. Included in one of the two accessory kits is the brass thread reducer. It has a 1.5mm thread on the outside which is designed to thread into the upstand. On the inside of the reducer is an N8 which is an 8mm bolt through allowing for ideal positioning of an internal bolt to fit.

Back to Back: Requiring just seconds the newly developed system is incredibly easy to apply. Available in the second accessory kit, you will find two plates featuring holes all the way through. The plate is fitted on the inside of the door and the bolt is pushed through the plate and screwed into the brass reducer. Then, the internal handle is fitted using the impressive hidden fix system. Not only is this very easy and fast but provides an extremely strong back method of fixing.