See more Tiling Adhesives
UniBond Ready to use Wall tile adhesive & grout, White 1.38kg
This wall tile adhesive & grout is waterproof and suitable for ceramic and mosaic wall tiles, max sixe 300 x 300 mm.
- For use on - Suitably prepared rigid walls
- Recommended for - Bathrooms and kitchens
- Water, heat and mould resistant
- Suitable for splash areas
Features and Benefits
- 2 in 1 adhesive and grout
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||24 hours|
|Ready to grout||24hours|
Follow Instructions and IT Works Well
Anonymous - 8 days ago
As stated, this tile adhesive and grout is for a maximum of 3mm bed and tile gaps, and the walls must be correctly prepared (sealed) to give the adhesive element time to work. It is a water based product, so it does time to dry \ stick (24 to 48 hrs), before applying it as a grout..
Used one tub (bought in store) to tile splash backs in kitchen.
Worst DIY product I've ever used
BenD28 - 1 year ago
Bought 2 tubs of this to tile my bathroom. Thought I would pay the extra for the Unibond stuff, rather than the own brand, to make sure it does the job. Unfortunately, it was a total waste of money... 50% of the tiles fell off / came loose after 24hrs. There is huge shrinkage as well, meaning any edge tiles dry in different positions and don't line up. It sticks to anything but the wall & tile! It also has poor coverage - nowhere near what the tub suggests.
Save your time & money by getting B&Q brand instead!
debz73 - 2 years ago
I ordered online and the item was damaged we have refused the item twice now. . Next time I shall go to the shop to buy .
great product / bad packaging
dee eye why - 2 years ago
This is the second batch of UniBond combined tile adhesive and grout that I've used and I can't fault it at all, goes on smooth, doesn't dry too fast or too slow. That said, I can fault the people who packaged it and sent it to me, as it arrived cracked, with the base of the pot almost hanging off. Luckily I had kept the first old (empty) pot and just transferred the adhesive into that.
Quality control concerns
Anonymous - 3 years ago
Tiling a bathroom initially using a competitors tile adhesive, I needed two tubs to complete grouting. First tub needed a lot of mixing to make it workable, second tub contained 6mm of fluid on the surface. When mixed in, the usable consistency ran out of the grout lines. Will not be buying this product again.
Customers who bought this also browsed
Mapei Fast Set Powder Stone & porcelain adhesive
This stone & porcelain adhesive white is waterproof and suitable for ceramic, porcelain and natural stone tiles. For use on - Plaster, plasterboard, render, screed, concrete, ceramic & porcelain tiles, mosaics & non staining natural stone products Recommended for - Wet areas including showers and ...
Mapei Powder Mosaic Tile Adhesive, White 5kg
This mosaic tile adhesive is waterproof and suitable for ceramic, glass, natural stone & porcelain. For use on - Concrete, plaster, plasterboard, plywood & cement boards Recommended for - Kitchens, bathrooms & wetrooms Frost, water & heat resistant Flexible for where limited movement is likely e.g. ...
Mapei White Anti-Mould flexible grout (W)5kg
This 5000g anti-mould flexible grout is use with underfloor heating & timber floors on for ceramic tiles, natural stone & porcelain. Simply apply and leave for up to 5 hours to dry. Each pack covers up to 39 m² on average. Guarantee - 1 year Resistance - Mould and water ...
NX Universal Powder Wall & floor tile adhesive,
This high polymer modified cement based adhesive is waterproof and suitable for suitable for walls & floors. For use on - Ceramic, porelain & stone Recommended for - Walls & floors Slip resistant Flexible for where limited movement is likely e.g. wooden or heated floors Suitable for splash areas and ...