See more Tiling adhesives

Home

Right chevron

Flooring & tiling

Right chevron

Tiling adhesives

Right chevron
Zoom inZoom outZoom reset
UniBond UltraForce Ready mixed Ice white Tile Adhesive & grout, 12.8kg

UniBond UltraForce Ready mixed Ice white Tile Adhesive & grout, 12.8kg

£37
Loading
Checking availability...
Loading
Checking availability...

Product details

Product information

Use the Unibond Wall Tile Adhesive and Grout for ultimate durability. Drying time is 24 hours and it is suitable for ceramic, porcelain and mosaic surfaces.

  • Suitable for Ceramic & porcelain
  • Mould resistant
  • Water resistant
  • Not suitable for underfloor heating
  • Lifetime guarantee

Features and benefits

  • UltraForce fibre technology for ultimate durability
  • Triple protection system repels and protects from mould. The revolutionary slow release anti-mould fungicide lasts more than 50% longer than standard fungicides
  • Suitable for large format tiles 300x600 mm

Specifications

BrandUniBond
RangeUltraForce
ColourIce white
Coverage per pack8m²
Drying time24 h
LocationInterior
Suitable surfaceWall
Product weight12.8kg
Volume11000ml
Model name/number2570752
Product code5010383319489

Reviews

Full star
Empty star
Empty star
Empty star
Empty star
1 / 5(2 reviews)

This product has a serious flaw

Full star
Empty star
Empty star
Empty star
Empty star

mcdoofw - 15 days ago

After 10 days I was still waiting for the tile adhesive to set, I gave up and was forced to lift the tiles, adhesive still wet, nightmare mess and great expense and time to correct avoid!

Fails at both tile adhesive and grout

Full star
Empty star
Empty star
Empty star
Empty star

jatros - 5 months ago

I have fitted 300 subway tiles in a small downstairs toilet using Mapei Mapegrip ready mixed adhesive with no issues what do ever - unfortunately I ran out with just 25 tiles left to fit. Thinking that the next job is to grout I thought for the sake of 25tiles I’d buy this product and then use it to grout afterwards. Terrible decision.

The tiles I used the adhesive for all needed to be removed as the adhesive is so wet is slumped down behind the tile causing the top of the tile to tip inwards (to note - I had skimmed the walls so there wasn’t an excessive amount of adhesive behind the tile). I ended up buying a small pot of Mapegrip to finish the tile fitting...with great success.

I then thought I’d try it as a grout as maybe it’s better for that job. Once again terrible decision.
The grout did not go off evenly, making it nearly impossible to get a good finish - it’s just too wet to use and get a decent finish. I ended spending hours scraping all the grout out and cleaning the joints to allow me have another go with a BAL product.

In short - utter rubbish, if you have pride in your work - don’t use it.