See more Sealants
Unika Slate Matt Worktop Sealant & adhesive, 20ml
Sold & shipped by B&Q
10% off when you spend £2000+ OR 20% off when you spend £3500+. Discount applied at checkout.
- Comes with 25g tube colour matched ColorFill, 20ml bottle of ColorFill solvent and applicator tool
- Keep out of reach of children. Keep away from heat, smoke, hot surfaces, sparks, open flames and other ignition sources. Avoid breathing fumes/vapours. Use only in a well-ventilated area
- Use 1 tube of ColorFill per joint. Apply a thick bead of ColorFill around the leading edge of the joint to both the bottom and top of the exposed core taking care to ensure adequate sealant around the front and back edges and bolt slots. Quickly close the joint and allow excess sealant to squeeze out of the joint, align the two sides and tighten the bolts fully. Do not overstress joints. It is important that the joint is closed quickly as the sealant will start to set immediately. The excess sealant should be removed with a spatula which should be drawn towards the front edge from the back of the worktop applying pressure down and into the joint thus ensuring there are no air holes along the top of the joint
Features and benefits
This slate colorfill joint sealant and repairer is an adhesive and sealant in one, it is designed to repair chips and scratches in your worktop and seal joints and excludes the need for silicone. It is available in a variety of colours to match your worktop so you can achieve an invisible seamless joint.
- Easy to use, comes complete with an applicator tool
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.