5 people bought this in 48 hours
V33 Renovation Soft Grey Satinwood Wall tile & panelling paint, 75ml Tester pot
How much will I need?
Product details
Product information
We recommend testing out your favourite colours at home. With this 75ml tester pot, you can make sure this is the right paint for you before you start decorating.
- Guarantee - Statutory
- For use on Tiles
- Suitable for use on Multi-material surfaces
- Surface Preparation - Wash the surface with a sodabased or sugar soap (alkaline) cleaner, focusing on the grouting. Ceramic tiles, Wall Tiles, Border Tiles and Glass Bricks: Wash, rinse thoroughly with water then allow to dry. Panelling: Wash, rinse thoroughly with water then allow to dry. Lightly sand with 240 grit sandpaper and remove dust. Tile Grouting: Carefully clean the tile grouting with an abrasive sponge or brush to remove any residual cleaning products or any traces of mould. Remove any silicone sealant before painting. Reseal after application of the paint
- Instructions for Use - Apply the paint at room temperature between 12 and 25°C and avoid draughts. 1. Stir the paint for 5 minutes, working around the bottom of the tin with a wide stick to mix it well. 2. Work on small surfaces. Apply from one end to the other. Follow with successive cross strokes. Do not start 2nd coat while it's still drying. Leave to dry for 6h and apply a 2nd coat in the same way. On horizontal surfaces, the paint has to be covered with the Renovation Worktop Protection. Once the sachet has been added, the mixture must be used within 10 days to maintain optimal adhesion and performance.
Features and benefits
- High Adhesion, even in a wet environment
- High Resistance to temperature variation
- Ultra Washable and easy maintenance, with high resistance to household cleaning products
- Aquaresist technology creates a tough, waterproof barrier
- 2-in-1 paint which requires no undercoat
Specifications
| Brand | V33 |
|---|---|
| Application method | Brush or roller |
| Base | Water-based |
| Colour | Soft Grey |
| Coverage | 0.9m² |
| Container type | Tester pot |
| Drying time | 24 h |
| Finish | Satinwood |
| Location | Interior |
| Texture | Smooth |
| Recoat time | 6 hours |
| Minimum touch dry time | 1h |
| VOC level | Low |
| Volume | 75ml |
| Washable | Washable |
| Product code | 3153895181426 |
Reviews
3 / 5(2 reviews)SamSan - 5 / 5 - 22/04/2023
Kitchen
Bought to revamp kitchen, sugar soaped the old tiles, washed down and dried. Then put on thin coats with roller for less streaks, and less drips which makes it even. Important to not go over what you just did as will lift off. Did many thin coats, maybe 3 or 4 to cover the tiles which were dark. Recommend the brand but also tester pots which go a long way. Cheaper than replacing all the tiles. Bought large pot with additive, and cupboard paint also to do the same with those.
SDB1982 - 1 / 5 - 21/08/2022
Shocking!
Bought this to paint tiles in my bathroom, we cleaned the tiles, dried the tiles and painted them, the paints adhesion when applying is poor, and when we finally got it to stay on our 4th coat, it’s so fragile and easy to peel off as I went to clean it with a soft sponge and it just come away!