See more Multi surface paint
Valspar Trade Pure brilliant white Satin Metal & wood paint, 2.5L
Sold & shipped by B&Q
This Pure brilliant white satin wood & metal paint has been specially designed to give a durable and long-lasting finish on a range of surfaces. Simply apply 2 coats with a brush, roller or spray and leave for 1 hour to dry - a great way to give the surfaces additional protection. Covers 25 m² per litre on average.
- Suitable for Metal & wood
- The surface must be clean, dry, free of dust and grease. Glossy surfaces should be deglossed before painting. Repair all damaged areas. Remove old, loose or flaky paint. Cover the surrounding area whilst decorating to provide protection against paint spills. For best results, seal new, bare-wood surfaces with Valspar® interior primer and undercoat. New, fresh plaster must be sealed with Valspar® interior primer & undercoat prior to painting. Other bare, absorbent surfaces must be sealed with primer or a first coat of this product prior to applying the finishing coat
Features and benefits
At B&Q we want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up so you are sure that this is the right colour for you.
- Outstanding flow and levelling
- Tough and durable
- Excellent coverage
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Application method||Brush, roller or spray|
|Colour||Pure brilliant white|
|Drying time||1 h|
|Instructions for storage||Tightly sealed in cool frost free condition.|
|Recoat time||2-4 hours|
|Minimum touch dry time||1h|