See more Extractor fans

Home

Right chevron

Air treatment

Right chevron

Extractor fans

Right chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
Vent Axia 409161 Solo Pro HTP Centrifugal Extractor Fan Humidistat/Timer/Pull Cord

Vent Axia 409161 Solo Pro HTP Centrifugal Extractor Fan Humidistat/Timer/Pull Cord

Sold & shipped by Prime Electrical Group Ltd

Available online only and not stocked in B&Q stores

£
133.25
Loading
Checking availability...

Product details

Product information

    Normally used in bathroom / toilet locations. This model incorporates a built in humidity (condensation) sensor. When condensation is detected the fan switches on automatically. When the condensation level drops below the threshold the fan runs on for the pre-set timer period then switches off.


    Can also be wired to work in conjunction with the room light switch, when the light is switched on the fan comes on, when the light is switched off the fan runs on for the pre-set period.


    Requires permanent live, switched live and neutral connections for timer option to function (3 wires, excluding earth). The switched live connection can be omitted if only humidistat running is required. This fan must be connected to a permanently live supply and not routinely switched on / off. Additionally there is a pull-cord switch to manually switch the fan on. When switched off the fan reverts to humidistat function.

    • Fittings & fixings not included
    • Ducting not included

    Features and benefits

    • Mains voltage 220 - 240V AC 50Hz. 17 watts power consumption. Please note information on electrical connection requirements noted below!
    • Extraction rate 22 litres per second, 80 cubic metres per hour. Sound output 30dB(A) @ 3m
    • Single speed, can be wall (recommended) or ceiling mounted. Supplied with detachable backdraught shutter
    • Time on adjustable 3 - 25 minutes. Humidistat set point adjustable 40-98% R.H.
    • Pullcord over-ride (on / humidistat). IPX4 rated
    • Class II - double insulated. CE and UKCA certified
    • Dimensions: 154mm tall x 154mm wide x 120mm deep (beyond installed surface). 99mm diameter spigot, extends to 20mm. For connection to 100mm / 4 inch diameter ducting
    • Requires permanent live, switched live and neutral connections for timer option to function (3 wires, excluding earth). The switched live connection can be omitted if only humidistat running is required. This fan must be connected to a permanently live supply and not routinely switched on / off. Additionally there is a pull-cord switch to manually switch the fan on. When switched off the fan reverts to humidistat function.

    Specifications

    BrandVent-Axia
    MaterialABS plastic
    ColourWhite
    Product height154mm
    Product width154mm
    Projection from the wall120mm
    Spigot diameter99mm
    Extraction rate80m³/h
    Power voltage supply220-240V
    Noise level at 3m30dB(A)
    Maximum timer duration25min
    Power consumption in use17kWh
    Room useBathroom & WC
    IP ratingIPX4
    Model name/numberSolo Pro HTP
    Control typeHumidistat & timer
    Overload protectionOverload protection
    Timer typeTimer facility
    Product code5015135091613

    Documents