See more Door Linings
Whitewood spruce Unfinished Internal Door lining, (H)2100mm (W)108mm
Our stores do not stock this product
- Surrounding any internal door. It's ready to paint, stain or varnish to get the look you want
- Any internal door
- Guarantee - 1 year
Features and Benefits
- Suitable for a 686mm or 762mm door
- Manufactured from PEFC Certified Whitewood Spruce
- Includes two uprights, one head and loose door stops to be fitted once door has been installed
- Option to reverse the head depending on whether you have a 686mm or 762mm door
- 108mm used for brick work walls (plus plasterboard and plaster)
- For lining out door apertures ready to hang a door
- Ready to paint, stain or varnish to get the look you want
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Timber approval||PEFC approved|
Size not as advertised!
Zdex9r - 2 years ago
The advertised sizes are 131x28mm x2100
I therefore bought 9 trusting the sizes without physically measuring
Unfortunately when I opened up toatart building the lining it turned out every jamb was 2010 NOT 2100
No good when every millimetre counts!
I then had the hassle of loading 9 door kits back into my car and wasting my time and fuel taking them all back to b and q.
The store was told of this advertising error and I'm therefore surprised to see the same product and size labelling error being advertised online!
Please ensure you check the physical sizes and do not trust the label!
Cyber1 - 2 years ago
Warped and unusable , just terrible. I would not recommend
Not you - 3 years ago
I bought three of these door linings every one was twisted! B&Q don't even follow there own storage instructions, these should be stored flat but are stood up. If you purchase these check the wood thoroughly for twists, open up the pack if you need to.
Ok for the money.
Kev8611 - 4 years ago
Some bits of damage to jambs but easy to hide. Height is advertised as 2.1 but they are barely over 2 metres but no big deal. As for others saying about widths and b&q not stating. it is quite clear its a reversible head and does a 686 or a 762. Very easy to measure without having to assemble it and measure. If you dont know this then you shouldnt really be fitting it.
Hard to use
craftwithus - 4 years ago
As soon as they were unpacked they twisted out of shape. I have managed to force them into an some sort of line, but door has needed extra trimming to fit. Now, when undercoating, a previously smooth piece of timber has gone all furry, requiring further work. I had intended doing all my doors with this product, glad I only purchased 2 though.