See more Extractor fans

Home

Right chevron

Air treatment

Right chevron

Extractor fans

Right chevron
Left chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
Xpelair DX200T 91014AW  Premier Centrifugal Extractor  100mm / 4 Inch (Timer Model)
Right chevron

Xpelair DX200T 91014AW Premier Centrifugal Extractor 100mm / 4 Inch (Timer Model)

Sold & shipped by Prime Electrical Group Ltd

Available online only and not stocked in B&Q stores

£
85.95
Loading
Checking availability...

Product details

Product information

    Ideal for use in bathrooms, shower rooms, toilets and utility rooms where longer duct runs are required. Gloss white casing for a clean and sleek appearance. A two-part casing enables the unit to be surface or recess mounted. The clip-off front cover and pull-off removable fan blade allow easy cleaning and maintenance. Features an automatic air operated back draught shutter.


    This model is for operation with the room light switch. When the light is switched on the fan comes on, when the light is switched off the fan continues to run for a pre-set time. Requires permanent live, switched live and neutral (3 wires excluding earth) at the fan position in order to operate correctly.

    • Fittings & fixings not included
    • Ducting not included

    Features and benefits

    • Mains voltage 230/240V AC 50Hz. This model requires THREE separate electrical connections - permanent live, switched live and neutral. Class II double insulated, no earth required
    • 11 / 14 / 19 / 27 watts power consumption (depending on selected speed)
    • 10 / 17 / 24 / 28 litres per second extraction rate (depending on selected speed)
    • 42 / 59 / 84 / 100 cubic metres extraction rate (depending on selected speed)
    • 20 / 22 / 37 / 42 dB(A) @ 3m sound output (depending on selected speed)
    • Suitable for wall and ceiling installations. For an intermittent extract of shower rooms, en-suites, w.c’s. Suitable for ducting up to roof tile vents
    • Contains integral backdraught shutter. Four speeds selectable at installation. IPX5 rated. Timer adjustable from 30 seconds to 20 minutes.Suitable for use with 100mm diameter ducting and flat ducting. Flexible aluminium and flexible insulated (not supplied)
    • Dimensions: 222mm wide x 252mm high x 118mm deep (beyond installed surface). 100mm diameter spigot extends for 40mm (see picture 6 for diagram)

    Specifications

    BrandXpelair
    MaterialABS plastic
    ColourWhite
    Product height252mm
    Product width222mm
    Projection from the wall118mm
    Spigot diameter100mm
    Extraction rate100m³/h
    Power voltage supply230-240V
    Noise level at 3m42dB(A)
    Maximum timer duration20min
    Power consumption in use27kWh
    Room useBathroom & WC
    IP ratingIPX5
    Model name/numberDX200T
    Control typeTimer
    Overload protectionOverload protection
    Timer typeTimer facility
    Product code5013562910149