Zinc Soryx Fixed Matt Anthracite Charcoal effect Mains-powered Integrated LED Outdoor brick ON/OFF Wall light 280lm (Dia)21cm
Product Features
- No need to change Integrated LED bulbs
- Durable rust & weather-proof Polycarbonate body
- IP65 RATED
Electrical recycling service
Thinking about buying a new electrical product from us? Find out about our electrical recycling service here
Product details
Product information
Product information
This brick light is mains powered which has the benefit of you being able to control your outdoor lighting by the touch of a switch.
- Resistant to rust. Weatherproof
- Fittings & fixings included
- No motion sensor
- Guarantee - 1 year
Features and benefits
- No need to change Integrated LED bulbs
- Durable rust & weather-proof Polycarbonate body
- IP65 RATED
- Finished in Anthracite
- It is ideal for installing in walls and illuminating gardens and outside areas.
Specifications
| Brand | Zinc |
|---|---|
| Bulb type | Integrated |
| Cap fitting | Integrated |
| Depth (mm) | 30mm |
| Design | brick |
| Diameter (mm) | 210mm |
| Dimmable | Non-dimmable |
| Height (mm) | 90mm |
| IP rating | IP65 |
| Life length | 20000h |
| Light colour | Cool white |
| Lumens | 280lm |
| Material | Polycarbonate |
| Maximum bulb wattage | 3W |
| Model name/number | BQ-CB-37481-ATR |
| Number of bulbs | 0 |
| Power output | 3W |
| Power source | Mains-powered |
| Power voltage supply | Mains fed |
| Supplied power source energy rating | A++ - E |
| Weight (g) | 240g |
| Width (mm) | 210mm |
| Product code | 5020024707551 |
Safety Information
Warnings on manuals (for all ceiling/wall lights) Important Safety Information All ceiling fittings should be connected via a 5-amp fused circuit and must be installed in accordance with current applicable building and electrical installation regulations. Before installation and servicing, disconnect the electrical supply at the mains. Carefully observe all instructions or warnings that are labelled on, or supplied with, your product. Unless otherwise stated, products are suitable for normal indoor use only and should not be used where water or high humidity may affect them. If in any doubt, consult a qualified electrician. Cleaning care The fitting should be cleaned with a soft, dry cloth only. Do not use polishes or abrasive cloths. Safety information For your safety, please remember the following: Always switch off the supply before removing shades/covers, changing lightbulbs or cleaning.
Manufacturer / EU responsible person
EU responsible person
Authorised Representative Compliance Ltd
Address
Ground Floor
71 Lower Baggot Street
Dublin
Ireland
D02 P593
Ireland
Contact
Reviews
5 / 5(2 reviews)daniel07 - 5 / 5 - 17/12/2023
Fantastic
These are just what we wanted to replace the existing ugly lights which were fitted to our new build property. They were a bit fiddly to fit due to the wiring we had but we managed to get it done and we're really pleased with the result. Low power consumption is great too.
PNev73 - 5 / 5 - 10/05/2023
Shining light
I bought these because last ones were aluminium and had salted after 15 Years. I can't see these salting or rusting in my lifetime. Bright enough without been too bright.