See more Log Cabins
12x8 Cannock 28mm Tongue & Groove Log cabin with felt roof tiles
This Cannock 12x8 log cabin with felt roof tiles is perfect for use as a summerhouse, workshop or extra storage space. Assembly required.
- 28 mm 28mm Tongue & Groove cladding
- Single glazed with toughened glass
- 10 years Manufacturers anti-rot guarantee applicable if care instructions have been followed
Features and Benefits
This log cabin has draught sealed doors and windows to help retain warmth during the cooler months, whilst the one open window allows for fresh air and ventilation during the warmer months. The 14mm thick floor is built on pressure treated floor bearers which isolate the shed from ground contact and help protect from rot.
- Made using responsibly sourced, Forest Friendly timber
- This log cabin is supplied with comprehensive fitting instructions and fixings provided. 2 people are required to build.
- We recommend that log cabins are sited on pre-laid, level, solid and dry ground, with a foundation of concrete to give a stable and even footing for your cabin to sit on.
- The dimensions given refer to the external dimensions of the product unless otherwise stated
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Number of doors||2|
|Number of fixed windows||1|
|Glazing type||Toughened glass|
|Surface finish||Planed timber|
|Fixings supplied||Fixings supplied|
|Timber approval||FSC® approved|
Good quality cabin, good value
MH71 - 2 years ago
Good quality timber cabin & door ironmongery, purchased with the felt tiles for extra roof finish life but these take a lot longer to fix compared to felt sheeting so give yourself enough time. Built during winter so had to erect quickly during dry weather, after a bit of time building the door frame & setting out the base/bearers the walls went up quickly along with the roof bearers & timbers. The time consuming part is the roof shingles as stated which need to be set out & fixed in an overlapping pattern - the supplied instructions weren't very clear on this but was provided with after asking a better set of instructions for the fixing of the shingles, the finished effect looks far better than rolled felt. A lot of time is taken also preserving the timber inside & out before painting (quite a job during cold/damp weather - build in spring/summer!)
Two man job for building on the most part with some basic DIY knowledge required.