See more Worktops
38mm Edurus Titan Grey Matt Square edge Laminate Worktop (L)3m (D)600mm
Create a functional yet stylish kitchen with this Edurus titan grey Laminate worktop. The matt surface is heat, water, moisture, steam, stain, impact and abrasion resistant and has a square edge profile.
- Guarantee - 5 years
- Heat, water, moisture, steam, stain, impact and abrasion resistant
- Laminate worktops are hygienic and easy to clean
Features and Benefits
Enhance your kitchen with a unique and modern surface thanks to a new family of worktops made with Fenix NTM. Anti-fingerprint and soft touch combines with highly scratch resistant surface in many different colours. Thermal healing of micro scratches is now possible thanks to its nanotechnology fabrication process.
- Easy installation process, protective film on the surface to prevent dust or marking agents
- Matching upstands and splashbacks are available to create your own custom design.
- Square edge profile with seamless effect for a clean and perfect shape design.
- Easy to clean and repair with simple and quick in house operations.
- The new NTM surface is suitable for horizontal and vertical use such as splash back panels to decorate and innovate your kitchen according to new styles.
- Matching and coordinating edging strips are available to buy separately
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Amount Recycled Materials||85%|
|Timber approval||PEFC approved|
Hard to keep looking clean.
Mar4tha - 1 year ago
Had the black mattt zinc fitted a couple of weeks ago and it looks lovely. BUT it’s extremely hard to keep clean. It’s apparently scratch heat steam moisture resistant but you have to put boards down for everything you do or the slightest bit of grease or cup mark or fingerprint doesn’t come off. It’s not the cheapest in the b&q range but I bet it’s one of the most hard work you will come across. I like to have tidy worktops with not a lot on show and getting boards out for every little thing is a pain. If I could return it I would. Buy a cheap worktop and put boards on anyway . Just be richer for doing it. Poor quality B&Q
JRM7 - 1 year ago
The colour of this worktop is lovely but it is awful quality. We have had it for a year now and am forever buying new products to clean the worktop, the smallest thing stains it. Where I would usually antibacterial the sides with a cloth I can't do with this worktop as it leaves water smears. It's a lot of money to spend out though so trying to decide if I can go through the hassle and cost of having it replaced! I would most certainly not recommend this product.
Billy X - 1 year ago
I fitted the zinc black Edurus work top about six monts ago. At first it looked fantastic, but over time marks became much harder to remove. I looked up the maker's website (Fenix) and they give some useful hints on how to clean the surface. One suggestion is to use magic sponges (available from B&Q ). We tried this and were amazed with the result. With very little effort, and just water as a lubricant the worktop soon looked like new again.
If I had not seen it myself I would not have believed it. A pity that B&Q don't supply a sample sponge with the worktop it would save them and the customers a lot of hastle. I have, however, not tried this on the Titan Grey surface.
Would not reccomend!
sophie26 - 1 year ago
This worktop is a load of rubbish, it soaks in stains in seconds. Making a cup of tea and accidently spill a bit... you've had it! I am constantly wiping this worktop and have many boards along in the hope that nothing gets spilt onto it. I would not recommend spending a couple of hundred on this plus fitting for it to practically be something to look at!
Dickiesdad - 2 years ago
Excellent quality easy to work on and good value for money