See more Wall Lights
Aura Cream Wall uplighter
- Recommended for Bedroom, hall or any living area
- Fixings supplied
- 1 year Guarantee
Features and Benefits
- Can be painted to match any décor
|Primary power supply||Mains powered|
|Number of lamps||1|
|Bulb supplied||Bulb sold separately|
|Bulb Type Required||Edison Screw Cap (E27) Candle|
|Maximum bulb wattage||60W|
|Wiring required||Wiring required|
took them back
exporter - 8 months ago
The electrical fitting is not fit for purpose. Cheaply made.
Inexpensive but fiddly connections
Yashamatoto Bicycle Co - 11 months ago
An inexpensive uplighter solution that melds subtley to the wall and gives a nice light (dependent on bulb you fit) but with a little more thought could have been better designed for making the connections and fitting the shade to the wall.
Plain and simple,
Amytirtle - 1 year ago
Wanted unobtrusive lights and these fit the bill fabulously, and great price.
Terrible quality....don't buy!
AL30 - 1 year ago
Purchased 3. These have been sitting on the floor waiting to be returned since I spent over an hour with the fiddly un-user friendly installation only for the light not to work because the connections are so poor. Don't waste your money!
Very good, but they're not for everyone!
Will C - 1 year ago
Cosnidering the price of this units (8 quid!) they're excellent!. I've fitted them throuhout my home (11 in total) and I think they're brilliant. However, they're not suitable for someone without basic DIY skills and they won't be popular with electricians! Here are my experiences.
First, they're made of unfinished, unsealed plaster. This is a deliberate design choice, because the lights are meant to painted after installation. As a result, there are both draw-backs and advantages! First, your hands will be coated in white dust as you handle the lights, exactly as you'd expect. Second, because the lights are made by casting them in a mould, they might not be perfect out of the box. They may have pits, dents and an eneven surface; again. as you'd expect. (Remeber the £8 price tag?!). The solution is simple; just apply a thin coat of Polyfilla over any imperfections and then lightly sand until smooth. Having said that, more than half of my lights required no sanding or filling at all.
Screwholes are provided to mount the lights to the wall, but if the holes are in the wrong position or not angled sufficiently to allow screwdriver access, they can be very easily drilled to a different angle. Or you can drill new holes to suit your requirements. Or .. you could even glue the lights to the wall!
And yes, there isn't much room for electrical wiring. But if you use 1mm twin and earth you'll be fine. (I used 1.5mm for some of mine and still managed to wire them, although it was tight). Before fitting the light to the wall, screw-in the bulb-holder and feed the wire through it from the rear of the fitting. After fitting to the wall, trim the wire, insert the ends into the separate clip-on electrical contact for the bulb and push the the clip-on part into place. Apply decorators caulk around the edge to seal the lamps against the wall and and then paint to your desired colour.
I had trouble fitting my chosen compact fluorescent bulbs because they were a llittle too big; so I gouged-out some extra room by scraping the inside curved wall with a chisel and course sandpaper! Again.. an advantage of their plaster construction. You can also alter the angle of the bulb-holder in the same way, again creating more room for your bulb. However, the fittings will not accomoodate a standard GLS bulb no matter how much material you remove; you'll need to stick to golf-balls, candles or CFLs (with modfications, as described).
So yes, I recommend them. I've never broken one, despite my creative scraping and sanding, and they can be made to look as eyecatching or unobtrusive as you wish acccording to your choice of paint colour. Just bear in mind that these light fittings are not 'plug and play'; you'll need some patience and you'll need to put in a little effort to get the best out of them. But that's what you'd expect for £8!
Customers who bought this also browsed
Alfaro Alabaster Brushed Chrome Double Wall Light
Recommended for Bedroom, hall or any living area Fixings supplied Matching 3 lamp ceiling light available 1 year Guarantee
Annelise Chrome Effect Wall Light
Recommended for Bedroom, hall or any living area Fixings supplied Matching 5 lamp and 9 lamp ceiling light available 1 year Guarantee
Cloe Leaf swirl Cream Double wall light
Recommended for Bedrooms, halls & living areas Fixings supplied Matching 3 lamp and 5 lamp ceiling light available 1 year Guarantee
Meridian Curved Glass White Brushed Chrome Single Wall
This wall light has a sleek modern design, the curved frosted shade is mounted upon a brushed chrome base and it perfect for adding some subtle lighting to your room. Recommended for Living areas and hallways Fixings supplied 1 year Guarantee