See more Paint Stripper
This paint & varnish remover strips fast & effectively. It's suitable For wood, metal, stone or concrete. An ideal solution for your DIY projects.
- Guarantee - 1 year
Features and Benefits
- Harmful if swallowed or inhaled. Keep out of reach of children. Wash hands thoroughly after use. If inhaled: give plenty of fresh air. If swallowed: call a poison centre or medical advice if you feel ill. Dispose at hazardous waste collection point
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drip resistance||Drip resistant|
|Location||Internal & external|
Anonymous - 10 days ago
The one next to it I've used before smells horrid and needs a lot of effort.
This one no well virtually no horrid smell and the paint all but jumps off itself
Love it xx
Perfect for job
Tillie3101992 - 3 months ago
I read others reviews but still wasn't wanting to pay a fortune so decide to try for my self, it worked amazingly. Stripped my threshold using this, a thin layer look 7 layers of gloss/paint off in one go. Then used a thicker layer to remove the dirt from the wood, really happy with this product.
Not bad, but use generously
Calliepops - 4 months ago
I bought this to remove some gloss I had applied recently and the paint beneath which it was not adhering to. Used two applications as per instructions to remove top layer, then had to repeat to remove layers beneath, plus a lot of elbow grease to scrape it off. First paint remover i’ve used, seemed to work ok, but may try a more expensive option next time to see if more efficient.
does what it says on the bottle
zippy732 - 1 year ago
Brought this product to remove varnish from a old door I had required. I took some 80 grit sand paper and gave the whole surface of the door a good key over then applied the sweet smelling paint and varnish stripper and left in the work shop for 30 mins and then scraped the blistered varnish off, I then followed this with a wash down and a scrub with a red scotch bright pad and let door dry before applying a second coat and leaving this over night product worked very well and the end result was good enough to apply 2 lots of under coat and two lots of gloss to make a safety gate for our flat to stop kids and dogs escaping,realised that I have to go back and get more to strip down the rest of the doors as they have all had cheap gloss put on them by previous owner
Next to useless on multicoat wood
dickiemint1 - 1 year ago
Took hours and only strips one coat at a time, overpriced. And that was a small area! Very messy.
Use a heat gun, much more efficient and quicker!