Bonda Marine Wood Seal - 2.5ltr

Sorry, this product is currently out of stock.

Size option

Checking availability...

This item is not available at this time.

Product details

A durable, single component polyurethane sealer which can be applied to all woods and concrete to leave a non-porous finish.

Guarantee - Statutory
Will store for many years if suitably stored unopened in original container. NOTE; this is a moisture-hardened product so storage life of opened tins is limited.
Apply by brush or roller. Should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other treatments should be removed. For most sealing purposes 3 coats are recommended. Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats. Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.
Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.

A moisture cured single part polyurethane varnish.

For marine use.

For wood for a non-porous finish.

The coating is tough yet flexible, and has excellent adhesion to many woods, with a high gloss non-yellowing finish.

Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.

Base	Polymer-based
Coverage per litre	2m²/L
Drying time	60-90 min
Location	Exterior
Maximum application temperature	5000°C
Minimum application temperature	1°C
Number of pieces	1
Product weight	270g
Recoat time	90 minutes
Volume	2500ml
Product code	5014197122044