Cecina Grey Satin Marble effect Porcelain Wall & floor Tile, Pack of 5, (L)600mm (W)300mm

• Suitable for Any room, excluding wet-rooms
• Slip Resistance - Medium
• Glazed
• Rectified
• A degree of colour or shade variation is an inherent part of these products. Always choose boxes with the same reference number, for choice and shade, calibre and production. Mix tiles to provide a natural finish during installation. Please ensure that a satisfactory effect can be reached prior to installing the products as claims relating solely to colour variation or shading that are apparent prior to installation will not be accepted after fixing. Any products found to be damaged or of unsatisfactory quality prior to installation should be returned to the store from where purchased to arrange for a replacement or refund. This does not affect your statutory rights. Do not use abrasive or corrosive cleaners. Be aware tiles are inherently slippery when wet. Suitable for indoor only. For use on walls and floors. Use an adhesive specifically intended for fixing porcelain tiles. Always follow adhesive and grout manufacturer’s instructions. For floor tiles leave for 24 hours before cutting and laying edge tiles. Measure your wall or floor, then check on the chart to see how many packs you'll need. Chart allows for approximately 10% wastage
• Caution: Do not use abrasive cloths or corrosive cleaners.
• Instructions for Care - Caution: Do not use abrasive cloths or corrosive cleaners.

Features and benefits

• Stain and water resistant.
• Can be used with underfloor heating.
• Rectified edges create a straight edge.