CHARNWOOD B250 10" PREMIUM WOODWORKING BANDSAW WITH 6" DEPTH OF CUT

Premium Grade 10” Woodworking Bandsaw.

A compact floor standing woodworking bandsaw with a massive cutting capacity, for a machine of this size and price, of 150mm (6″). The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The B250 has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table.

The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system. If extraction is not being used however, the bandsaw is fitted with an integral dust collection draw. Dust falling into the base of the machine will be collected here, allowing it to be quickly and easily emptied.

Supplied with 3/8” x 6tpi blade, rip fence, mitre fence, work light, floor stand, 1.8m power cable and UK 3 pin plug.

This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results.

Specification

Maximum cutting depth 150mm (6″)

Throat width 245mm (10″)

Max. cutting width with fence 105mm Left / 120mm Right

Table size 360mm x 320mm

Table Height 940mm

Table tilt 90-45 degrees

Mitre Guide T-Slot 8.5mm / 14mm

Cutting speeds 400 & 800m/min

Motor (induction) 375w (1/2hp)

Blade length 1826mm

Blade widths 6-13mm (1/4″ – 1/2″)

Dimensions (WxDxH) 670mm x 530mm x 1450mm

Weight 41Kg

Assembly Time Required 45 Minutes

Rating Light Trade

Product Guarantee 5 Years