Charnwood W625 12'' Contractors Table Saw with Rear Extension Table

A free standing table saw, often referred to as a site or contractors saw, with a big cutting capacity and a large table surface area for panel work. Powered by a quiet induction motor, the 12” diameter TCT blade is capable of cutting timber over 3″ deep.

The rip fence is rapidly adjusted thanks to the quick release mechanism and is solid when locked thanks to the extrusion which runs along the front of the table. The fence can also be used as a crosscut fence, by mounting it on the right hand side. The angle of the fence can be adjusted for cutting mitres. For anyone wanting to connect the saw to an extractor the dust kit provided will collect from above and below the blade from a single outlet.

Because of the large size of this machine, and the tendency to use it for panel work, it is often moved around the workshop. We provide lifting handles and wheels so that one person can easily move it. The working table surface is galvanised steel and the other metalwork is a durable powder coated finish to protect it through many years of work. Supplied with 24 tooth TCT blade, crosscut mitre fence, dust extraction kit with 100mm outlet, lifting handle and wheel kit, 2.0m power cable and UK 3 pin plug. It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build up of dust and chips.

Table Size (W x D) 550mm x 1600mm, Maximum ripping width 290mm (11.4″), Blade Tilt 90-45 degrees, Cutting Depth at 90 85mm (3.3″), Cutting Depth at 45 55mm (2″), Blade Diameter 300mm (12″), Blade Bore 30mm, Blade Width (Kerf) 3.0mm, Table Height 800mm, Motor (Induction) Braked 1600w (2hp), Motor Speed 3000rpm, Minimum Blade Width (Kerf) 2.8mm, Overall Dimensions (WxDxH) 850mm x 1700mm x 1050mm, Weight 57Kg, Assembly Time Required 60 Minutes, Rating Trade, Product Guarantee 5 Years.