COAT Walls and Ceiling, 2AM, Flat Matt Emulsion Paint, 5L

• Guarantee - Statutory
• Surface Preparation - Remove any old flaking paint from the surface and repair any damage. Give the surface a good clean and check that it's dry. If painting on to newly plastered walls check that the wall is dry and uniform in colour, then apply a mist (sealer) coat by adding 20% water to the paint.
• Instructions for Use - Give it a good stir before you start. To get a consistent finish when using different tins of COAT paint, premix the whole lot before painting. Apply with a brush, roller, or airless sprayer. Use generously for the best depth and coverage, don't be shy. Avoid too much rolling or brushing, and use clean smooth movements. Don't apply in very damp or humid conditions or if the room is below 10°C.
• Instructions for Storage - Store in a dry place, with the lid on tight and protect from frost.
• Guarantee - Statutory

Features and benefits

Certified B Corp, Carbon Negative and Child Safe (Toy Safety EN71-3)

• PREMIUM MATT FINISH (2%)
• HIDES IMPERFECTIONS
• INCREDIBLE COVERAGE
• DURABLE EASY-CLEAN
• DEEPLY PIGMENTED
• LOW ODOUR/VOC
• HAND-FINISHED FOR YOU
• B CORP CERTIFIED