See more Glues & adhesives


Right chevron

Glues & adhesives

Right chevron

Diall Beige Multi-purpose Grab adhesive 280ml

Sold & shipped by B&Q

Diall Beige Multi-purpose Grab adhesive 280ml
per L
Checking availability...
Checking availability...

Product details

Product information

High performance, gap filling, solvent based construction adhesive, fast curing with a high bond strength and excellent adhesion to most building surfaces

  • Guarantee - Statutory
  • Suitable for Chipboard, concrete, masonry, plaster & wood
  • Keep in unopened container for 12 months. Store in dry conditions between 5°C-25°C and protect from frost
  • Surfaces must be clean, dry and dust free. Cut off nozzle to desired angle/bead size. Using extruder gun, apply a consistent bead diameter to either substrate. Press surfaces firmly together, immediately pull loose and let dry for 10-15 minutes. Afterwards bond again and batten with a rubber hammer. Support if necessary
  • Contains hydrocarbons, C6-c7, n-alkanes, isoalkanes, cyclics, 5% n-hexane. Highly flammable liquid and vapour. Causes skin irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear protective gloves, protective clothing and eye protection/face protection. If inhaled, remove person to fresh air and keep comfortable for breathing. If skin irritation occurs: Get medical advice/attention. If on skin (or hair), take off immediately all contaminated clothing. Rinse skin with water/shower. Call a poison centre/doctor if you feel unwell. Dispose of contents/container in accordance with local/regional/national/international regulation. If eye contact: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing. Do not apply (chemical) neutralizing agents without medical advice. Take victim to an ophthalmologist if irritation persists

Health and safety

Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.



Application methodCartridge gun
Bonding strengthHigh bond strength
CompositionStyrene-butadiene rubber (SBR)
Container typeCartridge
Drying time24-48 h
LocationInterior & exterior
Maximum application temperature25°C
Minimum application temperature5°C
Model name/number100653522
Product weight364g
Product code5059340110714