Diall Solvent-based Spray contact adhesive 500ml

Product information

• High bond strength
• Guarantee - Statutory
• Material state - Liquid
• Use with proper ventilation. Avoid contact with skin and eyes. If contact with skin occurs wash with warm soapy water. If adhesive gets into eye, keep eye open and rinse thoroughly with water. Seek medical attention if irritation persists. Keep out of reach of children. Avoid contact with metals and protect product from frost
• Suitable for - Wood, glass, carpet, leather & card
• Keep adhesive in a cool and dry place at temperature >5°C
• Shake before use. Spray adhesive from 6" - 8" away onto one or both surfaces. Surfaces should be clean, dry and free from grease. For one-way application let adhesive dry for 30 seconds until tacky and then press into position. For two-way application, spray both surfaces and allow drying for 2 - 5 minutes before bonding. For temporary bonding, spray one surface and allow drying for 2 - 5 minutes before bonding. Excess adhesive can be removed with a solvent cleaner or white spirit. To prevent spray nozzle from blocking at the end of each period of use, turn the can upside down and press nozzle until spray is clear of adhesive
• Not CE marked

Features and benefits

• Bonds a wide variety of materials, giving a strong and rapid grip
• Best used on: carpets, wood, concrete, stone, tiles, rubber, foam, metals, rigid plastics, polyethylene, canvas fabrics, cardboard, paper and cork