See more Cartridge & tape guns

Home

Right chevron

Tools & equipment

Right chevron

Hand Tools

Right chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
Everbuild Silicone Eater Silicone Sealant Remover 100ml Size Cartridge Pack of 3

Everbuild Silicone Eater Silicone Sealant Remover 100ml Size Cartridge Pack of 3

Sold & shipped by Buyaparcel

Available online only and not stocked in B&Q stores

£
18.49
Loading
Checking availability...

Product details

Product information

    EVERBUILD SILICONE EATER is a revolutionary product specifically designed to remove all silicone based sealants and surface water repellents - cured and uncured. The product acts by digesting silicone polymers making them easily water or rinsable.


    Benefits

    Readily digests silicone

    Ready for use gel - may be used vertically as well as horizontally with no slump.

    Does not contain halogenated s.olvents, heavy metals, cyanide etc.

    Water clean up.

    Low hazard formulation


    Areas For Use

    May be used on aluminum* and its alloys, copper and its alloys, iron, steels, glass, ceramics, epoxy composites, most plastics.

    Has little effect on rubber and other elastomers.

    Has little effect on most painted surfaces.


    Limitations

    *TEST A SMALL AREA BEFORE USE. In all cases, apply a small test patch to an inconspicuous area. Leave for 2 hours min and rinse off. Check for staining/corrosion before attempting the whole job.

    * May attack nylon, certain fabrics/textiles and coloured anodised aluminum (used as a trim around showers), PU coated (re-enameled) baths, fluoroacrylics, chipped surfaces.


    Surface Preparation

    All surfaces must be clean, dry and dust free. Cut away as much as possible of the silicone sealant using a sharp edge. Protect surrounding areas with impervious masking tape


    Application

    Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut at an angle of 45o with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the trigger and keeping the gun at a constant angle to the surface being sealed.


    (a) Removing Silicone sealants from baths/showers etc.

    Spread the bead over the entire area which requires treatment (use masking tape to protect surrounding areas) A coating of at least twice the thickness of the underlying silicone should be applied.


    The dwell time required may be varied between 2 hours to 4 hours de

    • Guarantee - Statutory

    Features and benefits

    • Specification
    • Quantity - 3
    • Appearance Paste
    • Colour Amber to dark tan.
    • Odour Mild.
    • Boiling Point 205oC

    Specifications

    BrandEverbuild
    MaterialPlastic
    Model name/numberSILEAT_3
    Pack quantity1
    Product height1mm
    Product length1mm
    Product weight1g
    Product width1mm
    VOC emissions class in indoor airNo VOC level recorded
    VOC levelNo VOC level recorded
    Product code5055995523978