GoodHome Zanthe Chrome-plated Kitchen Side lever Tap
15% off selected kitchen taps. Discount already applied.
See more products in this offerProduct Features
- Comes in multiple finishes to match many kitchen styles
- Water-saving kitchen tap, up to 40% less water
- Quick to install thanks to its pre-fitted hoses
Product details
Product information
This Zanthe chrome-plated side lever kitchen tap is perfect for the families who are eager for the combination of the great product performance and perfect design in look.
- Comes with 1 x tap,2 x pre-fitted flexible 1/2 BSP connecting hoses, 1 x fitting set, tap fitting tool and installation instructions
- Operation: Single lever
- Suitable water pressure: High or low pressure
- Hose supplied
- Tighten by hand only and do not overtighten when install flexible hoses on tap. Never twist or fold the flexible pipe during fitting as this may damage or weaken the pipe causing leaks
- Guarantee - 10 years
Features & benefits
- Comes in multiple finishes to match many kitchen styles
- Water-saving kitchen tap, up to 40% less water
- Quick to install thanks to its pre-fitted hoses
- Anti-limescale spout makes it easier to maintain
- All our GoodHome kitchen taps are guaranteed 10 years
- 360 swivel spout makes it easier to manipulate
- Mixes hot & cold water
Specifications
| Brand | GoodHome |
|---|---|
| Finish | Gloss |
| Aerator | Replaceable aerator |
| Aerator type | Rubber easy clean (SLC) |
| Connection size | 8mm |
| Connection type | BSP |
| Hose bore size (imperial) | ½" |
| Hose diameter | 8mm |
| Hose length | 450mm |
| Material | Brass, stainless steel & zinc |
| Maximum operating pressure | 5bar |
| Minimum operating pressure | 0.5bar |
| Model name/number | ZA3832-G |
| Number of tap holes | 3 |
| Spout height | 268mm |
| Spout reach | 190mm |
| Spout type | U |
| Tap cartridge type | 35mm ceramic cartridge |
| Tap design | Contemporary |
| Tap flow type | Single channel |
| Depth (mm) | 227mm |
| Height (mm) | 395mm |
| Width (mm) | 52mm |
| Weight (g) | 1500g |
| Product code | 5059340452739 |
Manufacturer / EU responsible person
Manufacturer
Kingfisher International Products B.V.
Address
Rapenburgestraat 175, E,
Amsterdam
1011 VM
Netherlands
Contact
Reviews
4.46 / 5(13 reviews)Thos - 5 / 5 - 26/10/2026
Stylish
A very stylish design. Can’t comment on performance as not yet fitted.
CM2631 - 4 / 5 - 21/09/2026
Check tail length
A nice tap, looks good. However, check the length of the tails provided as the length stated on the box is not the length they were. We had to buy an extension to the tails.
Wolfgang97 - 3 / 5 - 09/09/2026
Budget performance bu good looks
This would be a five if the tap lever was easier to operate. The flow is either full on or barely dribbling. The tap looks fine but too early to say if the finish will stand the test of years. Ask me again in 10 years.
Claudine - 5 / 5 - 29/06/2026
Great. Will recommend.
Had it installed on 22/6. Very happy with it. It is good quality considering the price.
Nick - 5 / 5 - 27/06/2026
Kitchen tap
This tap seemed to improve the water pressure in our kitchen ,was easy to fit and looks fab.
Value - 5 / 5 - 30/05/2026
Good value
Looks good, fitted well and good price, well worth buying if you are looking for a basic kitchen tap
Sas - 5 / 5 - 22/05/2026
Kitchen mixer tap
Bought this last week and very pleased with the look as well as the quality.
Tom2026A - 4 / 5 - 22/02/2026
Well Worth It
Good looking practical item at a reasonable price. Works perfectly
Dru007 - 5 / 5 - 22/02/2026
Happy days
Well made very simple and easy to use. Looks fantastic the price was very good. Also to given a 10 year guarantee cannot be beaten. Very happy with this product
plb77 - 4 / 5 - 17/08/2025
Great value tap
I couldn't find a single lever low pressure tap of this size for the money. The tap has a good build, installs well (as the hoses are already fitted) and functions well. The only issue I have is that its not easy to get support within B&Q or by going to a plumber as the tap doesn't have a recognised name. I wanted to change the aerator to reduce the flow but initially couldn't find one. From my measurements, the screw thread on the end is between M19 and M20. If you google 'M19 tap aerator', you'll find one from a company that about saving carbon. The inner aerator fits and reduces flow from about 8 to 5 lpm, which is good. Overall, very pleased and better than the previous tap at 140 pounds.