See more Wall & Floor Tiles
Haver travertine Mist Stone effect Ceramic Wall & floor tile, Sample, (L)298mm (W)498mm
This sample wall & floor tile is ideal for bathrooms, wet rooms, kitchen walls & floors, kitchen splash backs & hallways.
- Surface finish - Satin
- Suitable for use with underfloor heating
Features and Benefits
- These high definition (HD) ceramic tiles are printed using the latest inkjet technology to achieve the most realistic stone effects
- Easy to install, low maintenance and hard wearing with no need to seal the tiles
- Recommended grout colour: Grey or white
- Recommended trim: Grey or white
Good tiles, despite unexpected colouring
pete_rbg - 5 months ago
I bought these tiles to use as a contrast against the Haver travertine Storm, thinking that they would be a lighter shade of neutral grey. However, the packs that I bought all have a slight creamy colour to them. This hasn't been an issue for me and I did check the colour in-store before purchase. Overall, I'm very pleased with the effect when set against the Storm tiles.
I've not had any issues with breakages and they have cut really well using a basic wet-blade tile cutter. I sealed all the tiles before using them, then again after grouting — water bounces off no problem.
gavb06 - 7 months ago
Used to retile EnSuite walls, very easy to cut and adhere to the wall with no breakages. Would have preferred a higher polished finish but didn’t want all the water marks as in a hard water area. Looks great finished and grouted. Exceptional value for money.
DIY tiler - 8 months ago
Just replaced my kitchen tiles. No breakages and nothing wasted. Would have preferred not to have had a matt finish but didn't want a highly polished finish either so for me matt was acceptable.
Looks like dirty tiles
themint - 2 years ago
Purchased these for a rental property I had purchased. Asked my builders to buy these tiles on the basis of the picture so only saw them for real after they had been installed. The effect looks like someone has spilt dust and chalk on the floor and left a load of water marks. Awful.
ViviC - 2 years ago
Unable to use as very fragile and broke too easily.
Customers who bought this also browsed
Black MDF (Wood fibre) Scotia trim 2.4m
Used around the edge of the room to hide the expansion gap required when installing wooden flooring, this slate effect scotia trim will create a neat and tidy border to your room. Guarantee - 25 Fitting instructions - Can be glued or pinned to the skirting Recommended for - Bedroom, ...
Harmonia Black Slate effect Laminate flooring 2.05 m²
This laminate flooring has an attractive Slate effect finish, embossed surface finish and 4 sided bevelled edge. Each plank uses a simple click system, so installation is simple and it can be used with underfloor heating to keep your home warm. Suitable for heavy domestic, general commercial use & splash ...
Leggiero Light grey Slate effect Laminate flooring 1.86
This laminate flooring has an attractive Slate effect finish, embossed surface finish and 4 sided bevelled edge. Each plank uses a simple click system, so installation is simple and it can be used with underfloor heating to keep your home warm. Suitable for all type of rooms (bathrooms when using ...
Mapei Fast Set Powder Stone & porcelain adhesive
This stone & porcelain adhesive white is waterproof and suitable for ceramic, porcelain and natural stone tiles. For use on - Plaster, plasterboard, render, screed, concrete, ceramic & porcelain tiles, mosaics & non staining natural stone products Recommended for - Wet areas including showers and ...