HG Tile Cement Grout Film Remover (Product 11) 1 Litre

• Guarantee - Statutory
• Use on Grout
• Instructions for Use - Dosage: For glazed tiles a solution of 1:10 (with water) is sufficient. For quarry tiles, brick, stone, terracotta and slate a solution of 1:4 is used. In bad cases use concentrated or alternatively use HG Cement Grout and Mortar Remover HGP12 Directions for use: First try HG Tile Cement Grout Film Remover on a small, preferably inconspicuous place. Apply HG Tile Cement Grout Film Remover liberally and spread over the floor covering no more than 10-15 m² at a time. Leave HG Tile Cement Grout Film Remover to work for 15-20 minutes, keeping the floor wet with solution during this time. Scrub thoroughly with a scouring pad or a stiff scrubbing brush and mop up. Rinse well (2-3 times) with water. Repeat this treatment with HG Tile Cement Grout Film Remover on affected areas if any white stains remain. Remove splashes of HG Tile Cement Grout Film Remover on paintwork immediately. Coverage: 1 litre will be sufficient for 20-50 m². Attention: To remove cement surplus from calciferous natural stone such as marble, travertine, Blue (hard)stone, several types of slate, terrazzo, granito, basalt and cement tiles. For these surfaces see HG Natural Stone Cement Grout Film Remover The use of HG Tile Cement Grout Film Remover may lighten the colour of the grout/cement.
• Guarantee - Statutory

Features and benefits

HG Tile Cement Grout Film Remover removes cement film, grout film, limescale, rust stains and stubborn residues from the face of tiles without affecting the grout.

• Removes cement film, grout film, limescale, rust stains and stubborn residues
• Doesn't affect the grout
• Makes grout stronger and more resistant to dirt