• Guarantee - 2 years
• Comes with a User Manual
• Includes plug

Features and benefits

Professional Use Air Compressor

With a net weight of 110kg, the HY3200S is a large air compressor and is ideal for mechanics or engineers who need to carry out repairs in the field.

Compressor Care: Pressure safety valves on Hyundai air compressors have been updated in compliance with the latest CE certification standards. The pressure release pull ring has been removed from the safety valve to prevent it from being misused to drain the air from the compressor tank, causing excessive wear to the valve. Air and moisture should always be released using the drain valve located on the bottom of the tank.

3hp Single-phase Compressor

HY3200S compressors have a 2.2kw/2200w/3hp single phase, 230v 50hz electric motor. They are supplied with a 13amp 3 pin plug. The 13 amp plug will be fine for normal DIY use. However, if the air compressor is being used for more than a 50% duty cycle (motor running for more than half the time) it may be advisable to use a blue 16 amp plug.

The compressor should always be plugged directly into the wall socket. If extension leads are used, the voltage drop may occur and this will increase the amperage which may cause the 13amp fuse to overload and blow. This may also be a problem in outlying rural areas where the mains voltage is below 230v, in which case a 16amp blue plug is recommended.

• HY3200S air compressor designed for commercial and professional workshop use.
• A belt drive air compressor, powered by an efficient 230v 3hp electric motor.
• The large 200L rolled steel air tank provides the capacity for powering you through the most demanding of jobs.
• Single phase air compressor, with a displacement of 14cfm and a maximum pressure of 145psi / 10 bar.
• Ideal for workshop use.
• Covered by Hyundai 2 year warranty.
• Full spares are available to maintain your air compressor for years to come.