Ideal Standard Vue Acrylic White Front Bath panel (W)1700mm

Some people said that it cracked whilst installing and I give it to you that it's a bit flimsy but so are all of them. This one fitted perfectly to replace same old one and the most important -in one piece. I have to say that it's quite expensive for what it is, you can get cheap one for just over 10 pounds, same material. But I'm glad this one is on its place (well, we'll see for how long)

The panel is very thin, if you need to cut around any pipes or boxing in then you will need to build a frame to support the panel. My panel fitted the bath at the front but was far to wide at the back due to the bath supporting wood that traps the panel in place not being parallel had to cut it down. The side panel corner that fits over the end panel has split slightly even though I took great care when fitting it.

not great quality if iam honest cracks very easy for the price .

I had to cut the panel to make it fit, removing the bottom and part of one end seriously affected the rigidity the panel. There are no supporting ribs on the back side, a serious omission. This product could have been so much better. I am now going to modify mine to add the strength that should have been there from the start.

Had to cut the panel both for length and had to cut a price out to go over a boxed in pipe, it was just ok, it would have taken much to split it though despite using a very fine toothed saw