Irwin Steel Panel saw (L)550mm
[This is a block of tabs..]
With seven teeth per inch, this steel 550mm high quality c75 steel blade panel saw from Irwin is specifically designed for domestic and trade use, gives a fine cut, and is used with a push & pull cut direction. The triple ground teeth make short work of the material you need to cut down to size. It comes with an ergonomically designed, soft grip handle so you can work for a prolonged period of time. With a 45° & 90° angle guide built in, you can easily cut a specific angle with complete accuracy.
Features and Benefits
- Finger rest offers maximum control
- Its teeth design ensures 6-7 times longer sharpness than non hardened teeth
- It offers 45° and 90° angle guide. Light and strong ultrasonic welded soft-grip handle ensures increased grip and enhanced comfort
- High-quality C75 steel is stable and ensures maximum power transfer
- Irwin Jack Fine selling saw is made from high-quality C75 steel is stable and ensures maximum power transfer. Ideal for cutting chip board, melamine, MDF and PVC pipes
|Rust and wear prevention||Water based lacquer|
|Blade type||High quality C75 steel blade|
|Saw teeth||Triple ground teeth|
|Teeth per inch (TPI)||7|
|Blade length (mm)||550mm|
|Type of cut||Fine cut|
Help & Advice
Do you know your hacksaw from your hammer? What about bradawls, cross-peins and strap wrenches? There's a whole catalogue of hand tools available and if you're going to do a job correctly, make sure you get the right ones.
Choose a convenient delivery date on 1000s of products
45 day returns policy
Arrange collection or return to store.Customer support team - 0333 014 3357
Free delivery on standard orders over £50
Excludes Large and Bulk delivery
Suitable for use on drywall and plasterboard, this 150mm jab saw from Irwin has been designed to give a coarse cut finish, and comes with 7 teeth per inch (TPI). Pointed nose hard point teeth for pushing through plasterboard and starting off cutting on vertical surfaces Ergonomic comfortable handle for ...
Suitable for Fine precision work, sawing wood and plastics, this 165mm coping saw from Magnusson has been designed to give a fine cut cut finish, and comes with 15 teeth per inch (TPI). It has a soft grip which has been specially created for added comfort whilst working. Guarantee - ...
Suitable for Fine work such as laminate timber beading and polyvinyl chloride (PVC), this 20" floor saw from Magnusson has been designed to give a fine cut cut finish, and comes with 14 teeth per inch (TPI). It has a soft grip which has been specially created for added comfort ...
With 10 teeth per inch, this carbon steel 22" rigid blade panel saw from Spear & Jackson is ideal for planed wood, skirting, architraves and dado rails (second fix). It comes with an ergonomically designed, suregrip handle & finger guide so you can work for a prolonged period of time. ...