See more Belt Sanders
JCB 950W 230V 533mm Belt sander PBS950J2
This belt sander is ideal for stripping wood, floorboards, other preparation work, sanding close to edges and cleaning up glued panels.
- Variable speed control
- 76mm wide x 533mm long sanding belt
- 350 m/min no load belt speed
- Adjustable belt tracking
- Supplied with dust bag, 80 grit sanding belt & carry box
Features and Benefits
- Quick release belt change for easy belt replacement
- Variable speed provides greater control when sanding different materials
- Adjustable belt tracking enables the sanding belt to be easily re-centred
- Large soft grip handle for increased comfort
- Guarantee - 3 years
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Speed control||Variable speed control|
|Belt length (mm)||533mm|
|Belt speed (no load)||350 m/min|
|Belt alignment||Adjustable belt tracking|
|Handle type||Soft grip handle|
|Switch type||Lock on trigger switch|
|Dust extraction||Dust extraction facility|
|Cable length (m)||3m|
|Brush type||Replaceable carbon brushes|
damian19 - 4 months ago
fantastic tool, powerful, great product, awesome!!
Expected a lot better from JCB
MichaelT - 10 months ago
I bought this yesterday to replace my Makita that lasted 14 years till it eventually died of old age. This JCB is going back today after less than 10 minutes use. The Dust collection is very poor, despite the (stupidly small) dust bag ballooning to its full capacity. Almost all of the dust was over me and the floor. After sanding the edge of 3 18mm boards the sander was getting seriously hot. Total area sanded 1.5m long x 18mm wide.
Most sanders (the bottom plate) get hot after prolonged use, but after less than 5 minutes the unit was blowing hot air and the bottom plate was slightly warm.
A very poor product marketed by JCB. I bought this because of the reputation of JCB, I won't make the same mistake again.
Robust and effective
SCD65 - 1 year ago
Bought this to take several layers of paint and varnish off of my dining room floor boards and it worked a treat. Great workhorse.
Anonymous - 1 year ago
Used this once and junked it. The rubber roller stripped out after a day. Used the old ALU I had borrowed from a friend and it put this plastic plaything to shame. A complete waste of money.
Robust, easy to use
98A - 1 year ago
I bought this a month ago, very pleased with it, simple to use, good selection of belts to cover most tasks.
JCB 240V Corded 240W 1/4 Sheet Sander PPS240J2
This corded 1/4 sheet sander is ideal for a variety of household sanding tasks. Orbit diameter 1.6mm/Orbit speed (no load) - 15000rpm 110mm wide x 103mm long sanding plate Supplied with a 3m cable, Dust extraction facility to help keep workspaces clean and Paper punch, cyclone box, dust extraction adaptor, ...
JCB Corded 330W 240V Random Orbit Sander JCB-ROS330
This corded random orbit sander is ideal for a variety of household sanding tasks where fast removal and excellent finish are needed. 6000-12000 rpm (orbits per minute) with 2.5 mm orbit diameter and Variable speed control to produce a smooth, fine finish 125mm long sanding plate Supplied with a 3m ...
Mac Allister 240V Corded 240W Multi Sander MEMS240
This corded multi sander is ideal for a variety of household sanding tasks. Orbit diameter 2mm/Orbit speed (no load) - 8000-12000rpm 92mm wide x 187mm long sanding plate Supplied with a 3m cable, Dust extraction facility to help keep workspaces clean and 3 x interchangeable bases, 9 x sanding sheets, ...
Mac Allister Corded 400W 220-240V Random Orbit Sander
This corded random orbit sander is ideal for a variety of household sanding tasks where fast removal and excellent finish are needed. 4000-12000 rpm (orbits per minute) with 5 mm orbit diameter and Variable speed control to produce a smooth, fine finish 125mm long sanding plate Supplied with a 3m ...