See more Tile cutters
Mac Allister 400mm Manual Tile cutter
This Mac Allister Heavy duty 400mm tungsten carbide tile cutter with it's 15mm cutting wheel, is suitable for cutting ceramic, quarry, porcelain, vitrified & terracotta tiles and will give you precise cuts in tiles up to 12mm thick.
- Guarantee - 2 years
- Suitable for Ceramic, porcelain, quarry, terracotta & vitrified tiles
Features and benefits
- This tile cutter includes an angle cutting guide
- The cutting wheels are replaceable with YG6X, 15 x 6 x 1.5mm
|Blade material||Tungsten carbide|
|Manual or powered||Manual|
|Maximum cutting depth||12mm|
|Maximum cutting length||400mm|
|Maximum tile thickness||12mm|
frustrating and time consuming
Gussy19 - 6 months ago
I broke quite a few tiles with this. takes forever to get a deep enough cut to snap the tile in the right place. my advice is spend £20 more and get the electric 500w tile cutter of the same brand.
Brilliant! Does the job
Jonno120 - 10 months ago
Cuts rules perfectly. It will only just straight, so if you want to cut L shapes for example, you need electric.
nickjn - 1 year ago
I am no professional but I found the ease of use delightful, practiced on brocken tiles first completed the job in no time,would recommend this cutter to any one.
Great tile cutter
DrLippenstein - 1 year ago
Used to cut 250mm x 400mm by10mm thick ceramic tiles. Has cut about 40 of these tiles, some requiring cutting the full 400mm length. Not one tile broken and nice clean breaks along the cut edge. I'm no professional just a reluctant DIY'er and had no problems with this tile cutter. As with most of the bad reviews with tooling it's probably user error rather than the piece of equipment itself.
Really rubbish tile cutter
Munirh1919191 - 1 year ago
Bought this to do some kitchen tiles and its rubbish. I managed to use it but all round a rubbish tile cutter that looks the part but in reality is no good