See more Table Saws
Mac Allister 800W 240V 200mm Table saw MTSP800A
This table saw is ideal for wood cutting.
- 2950 rpm no load speed
- 45 mm maximum cutting depth at 90° and 27 mm maximum cut at 45° mitre
- 200mm diameter blade
- Features a 2 m cable
Features and Benefits
- Supplied with 200mm 24T TCT saw blade (for wood), spanner and C-wrench
- Maximum bevel: 0° to 45° for mitre cuts
|No load speed||2950 rpm|
|Maximum cutting depth at 90°||45mm|
|Maximum cutting depth at 45° mitre||27mm|
|Blade type||24T blade|
|Disc bore||30 mm|
|Blade guard||Blade guard|
|Switch type||Trigger switch with lock-on setting|
Cheap and cheerful
Davidhead - 6 months ago
Having read the reviews on this I almost didn't buy it, but with most of the reviews being related to the fence I opted to chance it and bought a couple of small G clamps to hold the fence in place. The blade was tricky to centralize and took took a few attempts to sit right. Left the flimsy guard off but that was just preference and after clamping the fence in the position I wanted it I run 8 50cm long × 7cm wide strips of 18mm ply through with the blade at 45°, the cuts were clean with no tear out, accurate and the blade/motor had no issues cutting through at a safe and practical speed, it's good for the money.
a new low for b&q
bandqneedsclosingdown - 7 months ago
find a spoon sand it even smoother, it would be better than using this, also to get more precise results get really drunk before cutting
Second time lucky
John92 - 1 year ago
I purchased this a few weeks back and now I am happy with it. However, initially there were parts missing from the box and seeing I used a taxi I had to return to the store in another taxi and then once we checked another box to check all the parts were included return with another taxi
All this inconvenience could eliminated by the shop staff checking the contents before sale.
good for home diy
gijoe - 1 year ago
i purcased this item a few weeks ago it works well but the rip fence lets it down it will not hold in its place whilst working
Disposable table saw?
HHB - 1 year ago
I bought this in a hurry when my battery powered saw would not go through 30mm white oak and, to its credit, this saw helped me finish that project. However:
- The guide fence is a pain, literally, as screwing it tight enough to stop it moving is murder on the hands.
- And that's after you've gained enough experience using the self adhesive rulers to judge how many MM to add/subtract to get the width of the cut right.
- That's if your rulers are still there, because the second they unstick from the table they get the sticky side covered in sawdust and become pretty silver streamers instead of guides.
- There's no mitre trough for a mitre sled.
- How do you raise and lower the blade?
- Mine has a twisted frame and one screw hole doesn't touch the table
Customers who bought this also browsed
Bosch PFZ 500W 240V Multi-purpose saw PFZ 500
This corded multi-purpose saw is ideal for rough cuts in wood and metal. 0-2700 rpm no load speed Maximum cutting capacity of 150mm on wood and 150mm on metal Stroke length of 23mm Bosch SDS tool free blade change Comes with 1x saw blade for wood, 1x saw blade for ...
Bosch PSA 710W 240V Reciprocating saw PSA700E
This corded reciprocating saw is ideal for quick cuts in wood such as beams or branches and suitable for cutting plastic and metal. 0-2700 rpm no load speed Maximum cutting capacity of 150mm on wood and 10mm on metal Stroke length of 20mm Tool free blade change Comes with 1x ...
DeWalt 1100W 240V 216mm Compound Mitre Saw DWS773-GB
Comes with work piece clamp, removable carry handles, 30T TCT blade, hex key and blade key No load speed - 4500 rpm Maximum cutting depth at 90° - 70mm Maximum cutting length at 90° of 250mm Maximum mitre left - 48°/Maximum mitre right - 48° Blade diameter - 216mm
Evolution 1100W 240V 210mm Compound mitre saw FURY3B
This compound mitre saw is ideal for for perfectly cutting mitre & bevel angles through a wide range of materials with a single blade. No load speed - 4000 rpm Maximum cutting depth at 90° - 50mm Maximum cutting length at 90° of 120mm Maximum mitre left - 45°/Maximum mitre ...